Friday New Product: BusBoard Protoboards

Solar botics
July 26, 2013

Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise.

PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard
$3.75
A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects!
PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard
$6.82
For the ultimate in protoboard flexibility, here's a one-pad-per-hole, plated-through, double-sided board from BPS.
ProtoBoard2H-1, 2-hole Strips, 1 sided, 50x80mm
$3.11
Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.
ProtoBoard2H-3U, 2-hole Strips, 100x160mm Solder Protoboard
$10.78
Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.
ProtoBoard-3U, 6-hole Strips, 1 sided, 100x160mm
$10.78
This traditional soldering protoboard is very similar to a solderless breadboard, but also accommodates a 96-pin VME backplane connector for slotting connectivity.
StripBoard-1, 80x50mm Solder Protoboard
$3.11
Medium size stripboard protoboard, featuring full-width solder points.
StripBoard-3U, 160x100mm Solder Protoboard
$10.78
Stripboard make for fast prototyping for simple circuits.
SMTpads-Size1, 80x50mm, 50x50mil Pad SMT Protoboard
$3.75
This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a ground plane.
SMTpads-Size2, 100x80mm, 50x50mil Pad SMT Protoboard
$6.82
This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with ground plane.
SMTpads-Size2, 100x80mm, 50x50mil Pads,SMT Solder Protoboard
$6.82
This 50mil-pad breakout is best for SMD components on 50mil or 100mil pitch spacing, with a duplicate set of pads on the other side (no ground plane).
SMTpads-Size1, 80x50mm, 50x50mil Pad SMT Protoboard
$3.75
This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a duplicate pad arrangement on the backside.
SMTpads-Size2, 100x80mm, 100x100mil Pad SMT Solder Protoboard
$6.82
This 100mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a ground plane on the other side.
SMTpads-Size3U, 100x100mil Pads, 1 Side Pads, 1 Side Ground, Unplated Holes
$12.99
SMT parts are pretty common. This massive 3U size solder protoboard features 100x100mil pads on a large 160x100mm surface. Has ground plane on other side.
SMTpads-Size1, 80x50mm, 200x100mil Pads, SMT Solder protoboard
$3.75
For REALLY large SMD devices, the 200x100mil pads on this smaller protoboard will make construction much easier. Has ground plane on other side.
SMTpads-Size2, 100x80mm, 200x100mil Pads, Solder Protoboard
$6.82
For REALLY large SMD devices, the 200x100mil pads on this protoboard will make construction much easier. Has ground plane on other side.

It might be flying solar powered noodles, haunted samosas or gilded lardsicles... I highly doubt we'd have these exact items, but something not less exciting!

MORE POSTS

February 17, 2003
Closed for the holiday...

Monday February 17 is Family Day in Alberta (where we are), and President's day in the USA. So we're going to be out playing in the snow today. See you tomorrow!

November 22, 2005
ECRG Sumovore Success!

Just got word from the Eastern Canadian Robot Games that Sumovores SWEPT the top 3 positions of 23 entries in the amateur class mini-sumo (Good job Jess Billers with "Lovebug")! Well done guys!

April 29, 2003
New Gearmotors!

We're very excited to announce these new "baby" versions of the popular GM2 and GM3 gearmotors. These junior versions offer a 120:1 gear reduction ratio, built-in safety clutch, and 146rpm with 20in*oz torque at 5V drawing onlyh 90mA (620mA at stall). Take a look at them in the motors section of our website! The new […]

October 16, 2001
New Calgary Robot Club

This Thursday (October 18) is the inaugural meeting of the Western Canadian Robot Society, Room MD213 7PM at the Southern Alberta Institute of Technology (SAIT). We're hoping to revive the interest in the local robot scene, as Calgary already has one of the biggest robot games in the world, and it's a killer center of […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart