Friday New Product: BusBoard Protoboards

Solar botics
July 26, 2013

Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise.

PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard
$3.75
A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects!
PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard
$6.82
For the ultimate in protoboard flexibility, here's a one-pad-per-hole, plated-through, double-sided board from BPS.
ProtoBoard2H-1, 2-hole Strips, 1 sided, 50x80mm
$3.11
Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.
ProtoBoard2H-3U, 2-hole Strips, 100x160mm Solder Protoboard
$10.78
Long strips of copper too much for you? Complex zig-zags drive you nuts? Here's a nice compromise - solder prototyping with pairs of connected pads.
ProtoBoard-3U, 6-hole Strips, 1 sided, 100x160mm
$10.78
This traditional soldering protoboard is very similar to a solderless breadboard, but also accommodates a 96-pin VME backplane connector for slotting connectivity.
StripBoard-1, 80x50mm Solder Protoboard
$3.11
Medium size stripboard protoboard, featuring full-width solder points.
StripBoard-3U, 160x100mm Solder Protoboard
$10.78
Stripboard make for fast prototyping for simple circuits.
SMTpads-Size1, 80x50mm, 50x50mil Pad SMT Protoboard
$3.75
This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a ground plane.
SMTpads-Size2, 100x80mm, 50x50mil Pad SMT Protoboard
$6.82
This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with ground plane.
SMTpads-Size2, 100x80mm, 50x50mil Pads,SMT Solder Protoboard
$6.82
This 50mil-pad breakout is best for SMD components on 50mil or 100mil pitch spacing, with a duplicate set of pads on the other side (no ground plane).
SMTpads-Size1, 80x50mm, 50x50mil Pad SMT Protoboard
$3.75
This 50mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a duplicate pad arrangement on the backside.
SMTpads-Size2, 100x80mm, 100x100mil Pad SMT Solder Protoboard
$6.82
This 100mil-pad breakout is best for larger SMD components on 50mil or 100mil pitch spacing, with a ground plane on the other side.
SMTpads-Size3U, 100x100mil Pads, 1 Side Pads, 1 Side Ground, Unplated Holes
$12.99
SMT parts are pretty common. This massive 3U size solder protoboard features 100x100mil pads on a large 160x100mm surface. Has ground plane on other side.
SMTpads-Size1, 80x50mm, 200x100mil Pads, SMT Solder protoboard
$3.75
For REALLY large SMD devices, the 200x100mil pads on this smaller protoboard will make construction much easier. Has ground plane on other side.
SMTpads-Size2, 100x80mm, 200x100mil Pads, Solder Protoboard
$6.82
For REALLY large SMD devices, the 200x100mil pads on this protoboard will make construction much easier. Has ground plane on other side.

It might be flying solar powered noodles, haunted samosas or gilded lardsicles... I highly doubt we'd have these exact items, but something not less exciting!

MORE POSTS

May 3, 2006
New Pogo Push Probes in stock

I can't imagine why, but some people want to use these push pogo pins for other uses than robot appendages. Or battery contacts. Apparently they're really good for something called "JTAG applications" too, but I'll leave that up to you to decide. Scroll down to see them listed in the "New Items" column.

October 20, 2011
The Many Faces of SAFE

The SAFE (Solarbotics Arduino Freeduino Enclosure) is a marvelous contraption of laser-cut acrylic that makes a complete enclosure for your Arduino project. It gives you a protective shell with enough room for a basic shield, with knock-outs for power and USB connection. It even has a power switch. The big problem with Arduinos and Freeduinos, […]

April 11, 2005
Sumovore Line-follower

This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...

April 5, 2007
Closin' for Easter

It's Easter Break, and we at Solarbotics are shuttin' down for the weekend as of Thursday. See you Monday Morning!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.