I really recommend you take a quick boo over to Richard Caudle's webpage (aka: Frankendaddy) for a well-rounded, amusing BEAM webpage. Some great technology, in a well-written webpage. Read More...
Friday New Product and a Little Bit of F...
Solar botics
February 21, 2014
Solarbotics is helping out local fashion designers prepare their e-wearables for the Calgary MakeFashion. This time, Tony Grimes dropped in to experiment with his fiber-optic cloth from SensingTex as an illuminating surface, but the included 5mm LED was not dazzling enough. Time to hack in our 3W RGB Star Controller! The plan was to shift the colors to change the overall color of the fabric, but is serendipitously didn't work. Shifting the optical pickup across the lens of the LED split the light from the individual red, green, and blue elements to to different strands of the fiber optic cloth, making for a wicked speckled rainbow effect.
Aaaand we have a few new things to show off before we wrap up this week.
|
35STH36 NEMA-14 Bipolar 40mm Stepper $16.00 This motor is about half as small as our NEMA-17 Stepper and as a result only needs about half the power. Compared to the other NEMA-14 stepper we carry, it's a little longer but has the option to mount an encoder to the rear shaft! |
 |
Adafruit Monochrome 128x32 I2C OLED graphic display $17.50 These are tiny, sharp, and most impressive OLED monochrome displays! Just about 1" diagonal, made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. |
MORE POSTS
Robot Costume Hack
Since Halloween is just around the corner we've built and published a few projects in order to give some ideas to the DIY costume-inclined folks. One is DIY Halloween RGB LED Kitty Ears and two is Halloween LED Witch Hat. So for this third hack we started with an online-bought robot costume, but being a […]
Russian ARDX Documentation
Примечание переводчика: первый раз перевел - не поняли, второй раз перевел - не поняли, третий раз перевел - аж сам понял! (что электроника это круто), а они все нет... If you can't read the above sentence, don't worry - you can rest assured that your browser has not all of the sudden switched to Russian-o-vision. […]
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.