It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday. LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino […]
Fosshape and Wonderflex at Solarbotics
Solar botics
July 12, 2016
With our recent experiences with the costuming and cosplay communities, we've learned a lot about new materials that cosplayers use for making masks, props and armour. That added a few new words to our vocabulary and awesome new items to our inventory.
First, Fosshape. It is a felt-like polyester fabric that can be stretched and formed over a mold with heat (ideally a steamer). It collapses in thickness and sticks well to itself, forming a firm but pliable surface. It comes in two thicknesses, 300 and 600 which is double the weight. Easy to cut and paint, does not fray.
Fosshape 600 is a heavier, thicker and denser version of the 300, better for more rigorous and structurally intensive pieces of work. Takes dye quite well, mildew resistant.
Wonderflex is another heat-activated material that has a texture of 1mm thick lightweight plastic rather than fabric. It is pliable and sticks to itself while heated and becomes tough but flexible after cooling down. It is very popular in making prop armour and other rigid costume pieces.
Here are some samples of what Fosshape is capable of. It cuts well with scissors and Xacto knife, and can be formed around various objects and hold that form after cooling down.
It can be painted and formed into relatively simple...
... or quite complex shapes:
MORE POSTS
Organizing the Advanced Section
Every once in a while we like to re-arrange the furniture. Sure, it's nice to have things look new and different, but most of the time we're just trying to make things just work better. This week we've done a little bit of restructuring of our Advanced category - we hope it'll make it easier […]
BEP Application: Bare Bones PhotoVore
We like to have some play time at Solarbotics, and the "Bare Bones Photovore" is the results of one of these play sessions. It's a very simple (amongst the simplest, we'll hazard to say) light-seeking solar-powered robot, and find it easy to build using the Bicore Experimenter's PCB.
Robots using GM15s
Sorry for the lack of posts lately. If you didn't already know, Solarbotics has been moving offices, and it's taken a surprising amount of effort to get everbody/thing moved and settled. Beyond that, I've found some time to websurf...just a bit! A GM15 linefollower? Neat!(Update!:)He's just posted a video of it going ~40cm/s (although he's […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.