Because... of things... Solarbotics didn't do a booth or official presence at this year's Bay Area MakerFaire. We opted to do something fun this time, building a custom just-for-the-fair piece of sorta-interactive LED artwork. Following on the success of the quickie LED floor mandala resting area we did at the NYC MF, we turned it […]
Fosshape and Wonderflex at Solarbotics
Solar botics
July 12, 2016
With our recent experiences with the costuming and cosplay communities, we've learned a lot about new materials that cosplayers use for making masks, props and armour. That added a few new words to our vocabulary and awesome new items to our inventory.
First, Fosshape. It is a felt-like polyester fabric that can be stretched and formed over a mold with heat (ideally a steamer). It collapses in thickness and sticks well to itself, forming a firm but pliable surface. It comes in two thicknesses, 300 and 600 which is double the weight. Easy to cut and paint, does not fray.
Fosshape 600 is a heavier, thicker and denser version of the 300, better for more rigorous and structurally intensive pieces of work. Takes dye quite well, mildew resistant.
Wonderflex is another heat-activated material that has a texture of 1mm thick lightweight plastic rather than fabric. It is pliable and sticks to itself while heated and becomes tough but flexible after cooling down. It is very popular in making prop armour and other rigid costume pieces.
Here are some samples of what Fosshape is capable of. It cuts well with scissors and Xacto knife, and can be formed around various objects and hold that form after cooling down.
It can be painted and formed into relatively simple...
... or quite complex shapes:
MORE POSTS
MakeFashion Tech Gala Photos
Solarbotics just attended the MakeFashion Gala here in Calgary. It was a glowing show of glowing lights and wearable technology. Check out the photos in our Flickr stream. Photo courtesy George Dimitrov Photography Among all the other wonderful things we've seen using our string LEDs before, there was nothing quite as intense as these outfits. […]
Project Monday: All-Seeing Eye
This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]
Friday New Product: Galileo, Shift Level...
The new products are back! With more new products! Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit $19.95 Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit. Solarbotics I2C Shift Leveler $8.95 This little I2C adapter will have you shifting signals with ease […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.