Yes! Phones refuse to work and we are currently beating them into submission with a complete trust in our victory over them. Also, just to let you know, we haven't fallen off the face of the planet, we are just very busy getting ready to the Calgary Comic & Entertainment Expo, which will take place […]
Fosshape and Wonderflex at Solarbotics
Solar botics
July 12, 2016
With our recent experiences with the costuming and cosplay communities, we've learned a lot about new materials that cosplayers use for making masks, props and armour. That added a few new words to our vocabulary and awesome new items to our inventory.
First, Fosshape. It is a felt-like polyester fabric that can be stretched and formed over a mold with heat (ideally a steamer). It collapses in thickness and sticks well to itself, forming a firm but pliable surface. It comes in two thicknesses, 300 and 600 which is double the weight. Easy to cut and paint, does not fray.
Fosshape 600 is a heavier, thicker and denser version of the 300, better for more rigorous and structurally intensive pieces of work. Takes dye quite well, mildew resistant.
Wonderflex is another heat-activated material that has a texture of 1mm thick lightweight plastic rather than fabric. It is pliable and sticks to itself while heated and becomes tough but flexible after cooling down. It is very popular in making prop armour and other rigid costume pieces.
Here are some samples of what Fosshape is capable of. It cuts well with scissors and Xacto knife, and can be formed around various objects and hold that form after cooling down.
It can be painted and formed into relatively simple...
... or quite complex shapes:
MORE POSTS
Friday New Product: FETs
What we have today are not Fairly Expensive Tortillas or Fortunately Edible Theremins, but Field-Effect Transistors. If you know what it is, I will leave you to explore: 1RFZ44N N-Channel FET $2.50 The IRFZ44N is a very powerful useful N-Channel FET, with only 0.0175ohms resistance pushing 20 amperes at 5V! FQP27P06 P-Channel FET $0.95 A […]
Creality K1 Hot-End Comparisons
Let's play "Spot the differences"! We received some new inventory, and one of these things ...was not like the other (Sesame alumni, we are!). FYI, here are some differences between the K1 series of hot-ends. I don't believe them to be "OMG!" differences, but just worth noting. We've had good results with both styles, but […]
More Temperate Sensors
Alrighty folks, here you have it. We've just doubled the amount of items in our temperature sensor category by adding the following: Temperature Probe Phidgets Precision Temperature Sensor Sensirion Temp/Humidity Sensor Thermocouple Kit DS2760 DS18B20+ Temperature Sensor TMP36 Temperature Sensor And that pretty much rounds out all the temperature sensors we have planned to make […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.