It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]
EZ-B Sale, More New Stuff
Dave Hrynkiw
July 16, 2011
Well, we waited. Patiently you might say. After all, this Friday post is coming to you on a Saturday afternoon. But we still didn't receive any customer projects to show off. We don't ask much. Send us a photo. Maybe a handful of words to accompany it. But noooOooOooOOOoo. Now here we are, already part way through the weekend, with nothing. So you leave us with no choice. We're putting the EZ-B Robot Controller on sale by $20, just so that there's something interesting going on.
- Port Expander Shield - Allows you to easily add more digital outputs to your Arduino
- PWM Shield - Will fit on any board that is pin compatible with an Arduino Duemilanove.
- BNC Shield - Allows you to hookup any sensor that has a BNC connector.
- MicroSD Card Adapter - Perfect for mass storage, WAV/MP3 player and data logging, breaking out the MicroSD socket to a standard 0.1" 8-pin header.
- Serial Character LCD Driver Board Kit - Designed base on a popular serial LCD driver IC, created by Maryland EE professor Peter Anderson.
- Green LEDs w/ Flexible Leads - These consist of a bright LED and flexible twisted lead wires that have a 2 slot female connector on the end (which can be removed).
- 3.3V Regulator TO-92 Pkg - This regulator can handle up to a 20V input, and a 250 mA output.
- 3.3V Regulator TO-220 Pkg - A 30V input, 1.5A output, and a delicious chocolate coating. No wait, I'm pretty sure that last bit is wrong.
...aaaaand that's it. I know Calgary is lookin' pretty good this weekend, so we hope everyone can get outside and enjoy the summer, if the weather allows. Take care!
MORE POSTS
Friday New Product: IR Decoder, EZ-Robot...
So here's a late but tenacious Friday post with only 3 but mighty (brand new shiny) products. Not just some… random unrelated strange small bits… But much better! They are all kits. So they have more than one thing in them. Which is better than one thing... How about I stop mumbling the obvious and […]
LMR Start Here Kit, Beetlebot Preorders
Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.