Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Escaps back in stock!
Dave Hrynkiw
June 17, 2003
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer!
Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!)
It's a 3V rated motor, but our tests show that they spin quite nicely at 5V, drawing 4.2mA free (!!!) at 22rpm. Don't know what the stall current draw is, as we're scared to strip these delicate gears, but it's greater than 150mA. Check them out!
MORE POSTS
Junkbots book review
We're happy to say that our new book is being pretty well received! Check out this review at StreeTtech.com!
Closed Friday, April 21st.
Fun fact: The Friday before Easter used to be just like any other day of the week. But then they ('they' who? THE GREAT THEY, THAT'S WHO) decided that no, this Friday should be set apart from all the other Fridays of the year. So they tried attaching different names. First was Bad Friday, which […]
Solarbotics Closed for Heritage Day
We are so historical here, that we are going to be closed for Heritage Day - Monday August 4th. Never fear we'll be back on Tuesday 5th! No orders will be processed or sent out on that day, but we will be shipping on Tuesday. Cheers, Solarbotics Team!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.