We're closed for the Alberta Monday "Family Day" Holiday. See you Tuesday!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer!
Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!)
It's a 3V rated motor, but our tests show that they spin quite nicely at 5V, drawing 4.2mA free (!!!) at 22rpm. Don't know what the stall current draw is, as we're scared to strip these delicate gears, but it's greater than 150mA. Check them out!
We're closed for the Alberta Monday "Family Day" Holiday. See you Tuesday!
Well, we survived the battlefield of 2014 Calgary Entertainment Expo with no human, animal or machinery losses (although with an apparent vocabulary shift towards geekery). In any case, running a double booth was a lot of fun and a lot of work, which makes it satisfying and tiring at the same time. And educating: we've […]
So today we have a nest. And some other things, like a programmer. If you take the programmer you can program the cleaning wire nest and the code will travel through all the little coils and come out the other end all transformed and golden too. It's almost like enlightenment. And then it will suitable […]
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.