The Western Canadian Robot Games are fast approaching, so we're going to help spur on building by reducing the prices of our batteries by half! Get building - you only have less than 2 months to finish!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer!
Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!)
It's a 3V rated motor, but our tests show that they spin quite nicely at 5V, drawing 4.2mA free (!!!) at 22rpm. Don't know what the stall current draw is, as we're scared to strip these delicate gears, but it's greater than 150mA. Check them out!
The Western Canadian Robot Games are fast approaching, so we're going to help spur on building by reducing the prices of our batteries by half! Get building - you only have less than 2 months to finish!
Our clear breadboard was recently blogged on Makezine, which reminded me we juuuust about had an instructable ready for that same item. So, a few hours later, it is finished and posted. And while I was at it, I finished editing another Instructable by Jerome Demers, our intern. He did up a DIY Miniball instructable […]
We're sorry to see Becky go off to work with her husband on their own endevours, but that's ok; we have Robin now - a most worthy replacement. Bye Becky - we'll miss you! Come back sometime and say hi to Robin, ok?
The new updated front-end for Solarbotics.com is up! Those who had problems before with Netscape browsers, and the slow upload time is alleviated! As well there are new features, and easier to use functions. Check them all out. If you experience any problems please report them to the Webmaster
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.