This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]
Escaps back in stock!
Dave Hrynkiw
June 17, 2003
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer!
Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!)
It's a 3V rated motor, but our tests show that they spin quite nicely at 5V, drawing 4.2mA free (!!!) at 22rpm. Don't know what the stall current draw is, as we're scared to strip these delicate gears, but it's greater than 150mA. Check them out!
MORE POSTS
Site Down for Maintenance March 10
Our website will be down for server maintenance on Sunday March 10th, 2013 between 1.30am to 11.30am MST (3:30 and 7:00 am EDT). We apologize for the inconvenience.
Closed for August Long Weekend
Hi all. Yup, time for another long weekend! We'll be back to it Tuesday morning, so until then, keep them solar cells clean!
Sundancer review
Canada Computes has just run a web-review of our Sunancer Butterfly kit. Read More...
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.