Solarbotics has supplied some tech bits and pieces for the recent ART HACK II, an intensive artistic boot camp led by Visiting Artist, Raul Nieves (Blablablab, Practipo Barcelona), where students were building open source the 3D printers.
Escaps back in stock!
Dave Hrynkiw
June 17, 2003
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer!
Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!)
It's a 3V rated motor, but our tests show that they spin quite nicely at 5V, drawing 4.2mA free (!!!) at 22rpm. Don't know what the stall current draw is, as we're scared to strip these delicate gears, but it's greater than 150mA. Check them out!
MORE POSTS
Fireflies, Bundles, and Motors
Technically, winter starts with the Winter Solstice that occurs on December 21st. But we're pretty sure that whoever decided that is wrong, because it's starting to feel pretty darn cold out there. And to keep things warm, what do you need? Movement. And how do you make movement? Motors. So today we have range of […]
New Distributor & Science News
Solarbotics is happy to introduce a new distributor in Toronto, Canada - Bug'n'Bots. Owner Steve Jones have been involved with BEAM for a while now, and is d
Holiday Closure
We'll be shut down for the Holiday long weekend this Friday July 1st. It's Canada-Day up here, but we will be open again July 4th. Happy Holiday, y'all!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.