Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
So it turns out that we've underestimated the email services of the world. This has led to frustrations for some of our loyal users in reclaiming their email with the new website. We're sorry people. Completely our bad on that one. The good news is that testing so far shows that the issues should now be sorted out, so we'll be resending the missing emails to those of you who need 'em to get you up and running.
In other news, we've been discussing being a bit more transparent in our development processes, and letting you guys sneak a peek at stuff that's just on the horizon. Those of you with a keen eye and a subscription to our Flickr stream may have noticed photos of our prototype GVS backpack for our ever popular Ardweeny:
That's right, this beefy little board is capable of driving up to 12 servos at once! Perfect for a small 3DoF quadruped walker! And that still leaves you with space for an additional 6 sensors on the analog I/O ports (5 if you're using the I2C header). We're currently waiting on a final revision of the board to clear up some spacing concerns, and then we'll get it kitted and available to you fine folks out there. In the meantime, we have a bit of an issue; no one knows what to call this little monster! So we're opening it up to our community out there. To the victor go the spoils, as they say, and the winner that boss man Dave picks will receive the following bundle when the kits are ready:
Entries must be received by April 4th, 10:00AM Mountain Time.
Send your suggestions here. Feel free to enter as many times as you like, however, there can be only winner.
Good luck, and may the odds be ever in your favor!
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
Well folks, we don't have any new products to show off today (I guess we're all too busy watching the Olympics...), but we DO have a small handful of recently uploadedYouTube videos to show off. Dave has been sifting through some of our old archive tapes, and pulled out a few gems, like this footage […]
Everything is better with chocolate, even the new links: Self-Folding Paper Robot Inspired by origami paper sculptures and equipped with motor. (Via Beautiful Decay) Edible Chocolate LEGOs Mmmm, best Lego ever. (Via Colossal) Drawing Robot Seen lots of drawing robots before, but this one uses fans to create vacuum and attach itself to the metal […]
We've just recently been given the go-ahead to unveil more Wowwee BIOBugs - the toy that Mark Tilden had direct involvement in! This is footage we shot while down in New Mexico this Spring at the 2001 LANL workshop. The first video shows the BIOBug Beetle's ability to maneuver and respond to obstacles. The second […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.