Email Troubles & Name The Ardweeny ...

Solar botics
March 27, 2012

So it turns out that we've underestimated the email services of the world. This has led to frustrations for some of our loyal users in reclaiming their email with the new website. We're sorry people. Completely our bad on that one. The good news is that testing so far shows that the issues should now be sorted out, so we'll be resending the missing emails to those of you who need 'em to get you up and running.

In other news, we've been discussing being a bit more transparent in our development processes, and letting you guys sneak a peek at stuff that's just on the horizon. Those of you with a keen eye and a subscription to our Flickr stream may have noticed photos of our prototype GVS backpack for our ever popular Ardweeny:
That's right, this beefy little board is capable of driving up to 12 servos at once! Perfect for a small 3DoF quadruped walker! And that still leaves you with space for an additional 6 sensors on the analog I/O ports (5 if you're using the I2C header). We're currently waiting on a final revision of the board to clear up some spacing concerns, and then we'll get it kitted and available to you fine folks out there. In the meantime, we have a bit of an issue; no one knows what to call this little monster! So we're opening it up to our community out there. To the victor go the spoils, as they say, and the winner that boss man Dave picks will receive the following bundle when the kits are ready:

Entries must be received by April 4th, 10:00AM Mountain Time.

Send your suggestions here. Feel free to enter as many times as you like, however, there can be only winner.

Good luck, and may the odds be ever in your favor!

MORE POSTS

October 9, 2009
What can you do with a GM15?

...oh, just save the Republic! Just got this note in from Rob Meyer, who is using 3 of our GM15 pager gearmotors to drive his 1/18 scale R2-D2. Given that the real R2-D2 measures 108cm tall, that makes this cute cousin only 6cm (2.36") tall! There's a GM15 for each of the drive wheels, and […]

June 16, 2005
New Pics of MWT

Thanks to Roger K. (that pinky-ring wearing devil - congrats!), we've got a new pic of the Tildenator with his roboraptor in the press: Mark Tilden and the "RoboRaptor" Get it while it's hot - this link may go stale soon 'nuff...

September 13, 2005
SCC3733 Solarcell hacking

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]

September 23, 2009
Makecation Judging

Well, my stint as Makezine's Soldering Makecation councellor is over. Last thing to do is go over the entries and pick some winners. See them here!

1 2 3 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart