Orders over the weekend will be processed promptly on Tuesday!
A handy tutorial explaining how to put together the RGB LED Horns. Make your own, or get a kit with everything included (except for the paint).
Supplies:
Fosshape 300
2 x slow scroll RGB LED
2 x coin cell batteries
conductive thread
2 x coin cell battery holder - sewable
2 x pieces of velcro (hook side)
dimensional fabric paint (like this) - not included in the kit
Tools:
scissors
needle
heat gun
needlenose pliers
clear nail polish - optional
Step 1. PatternCut out your own pattern - a simple triangle and a circle for the base.
Step 2. Shape the hornSew the triangle along the long edge. Shrink and form it over the heat gun - make sure to watch the fabric, when heated too much it will melt and form holes. Instead of trying to form the hot Fosshape with your hands, the best way to harden the shape is to hold it above the heat gun making sure to heat it evenly and let it shrink. Shrink the bases too while keeping them flat, but don't sew them on yet.
Step 3. LEDs preparationWith needlenose pliers curl up the LED legs and bend them 90 degrees so that the loops sit flat when the LED is facing up.
Step 4. Battery holder
Grab the battery holder, a coin cell and the base and attach the LED using conductive thread. Make sure the polarity of LED and battery are correct. If everything is wired right the LED will light up.
Step 5. Sew the baseSew the base to the horn like shown and add a little tab of Fosshape and Velcro to the opposite side in order to keep it in place. Paint some clear nail polish on the bottom of the horns to isolate the conductive thread from touching the metal of the hair clip. Alternatively, you can fluff up the small scraps of Fosshape and fuse them over the stitches to protect the conductive thread.
Step 6. PaintEmbellish the horns with a pattern of your choice using the Tulip paint. It will take about 4 hours to dry. The Fosshape disperses the light quite nicely.
Step 7. Hair clipHot glue the hair clips to the bottom of each horn. Alternatively, you can sew the finished horns to hair clips or a head band.
Orders over the weekend will be processed promptly on Tuesday!
Liquid Metal to Make Stretchable Electronics The elastic tech has huge potential for wearable tech, mobile devices, and even electronic "smart clothing." New Material Inspired by Geometric Patterns Inspired by the intricate geometries and repetitive patterns found in Islamic art, researchers at McGill University developed a material with new properties. (Via ZME Science) Kinematic Petals […]
Mega Protoshield for Arduino $20.75 The Arduino Mega has LOTS of I/O. This Mega Protoshield by Adafruit breaks it all out for easy access and prototyping. Single Panel Breadboard with Terminals $13.00 830 contact single panel breadboard with 3 banana terminal jacks. Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is […]
This mini-sumo design by Jeremy Bloyd-Peshkin features our wheels, and one of our favourite building materials, Sintra. We can't laser-cut sintra (PVC=bad stuff when burned), but milling it works well, as this builder shows. The asymmetric motor layout works, as proven by this contest-winning design (scroll to the bottom of the page).
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.