March 14th - 03.14 So it stands to reason that at 3:09pm this afternoon (15:09), you should take a break, have a piece of pie, and remember how to associate the circumference of a circle with its area! Read More...
A handy tutorial explaining how to put together the RGB LED Horns. Make your own, or get a kit with everything included (except for the paint).
Supplies:
Fosshape 300
2 x slow scroll RGB LED
2 x coin cell batteries
conductive thread
2 x coin cell battery holder - sewable
2 x pieces of velcro (hook side)
dimensional fabric paint (like this) - not included in the kit
Tools:
scissors
needle
heat gun
needlenose pliers
clear nail polish - optional
Step 1. PatternCut out your own pattern - a simple triangle and a circle for the base.
Step 2. Shape the hornSew the triangle along the long edge. Shrink and form it over the heat gun - make sure to watch the fabric, when heated too much it will melt and form holes. Instead of trying to form the hot Fosshape with your hands, the best way to harden the shape is to hold it above the heat gun making sure to heat it evenly and let it shrink. Shrink the bases too while keeping them flat, but don't sew them on yet.
Step 3. LEDs preparationWith needlenose pliers curl up the LED legs and bend them 90 degrees so that the loops sit flat when the LED is facing up.
Step 4. Battery holder
Grab the battery holder, a coin cell and the base and attach the LED using conductive thread. Make sure the polarity of LED and battery are correct. If everything is wired right the LED will light up.
Step 5. Sew the baseSew the base to the horn like shown and add a little tab of Fosshape and Velcro to the opposite side in order to keep it in place. Paint some clear nail polish on the bottom of the horns to isolate the conductive thread from touching the metal of the hair clip. Alternatively, you can fluff up the small scraps of Fosshape and fuse them over the stitches to protect the conductive thread.
Step 6. PaintEmbellish the horns with a pattern of your choice using the Tulip paint. It will take about 4 hours to dry. The Fosshape disperses the light quite nicely.
Step 7. Hair clipHot glue the hair clips to the bottom of each horn. Alternatively, you can sew the finished horns to hair clips or a head band.
March 14th - 03.14 So it stands to reason that at 3:09pm this afternoon (15:09), you should take a break, have a piece of pie, and remember how to associate the circumference of a circle with its area! Read More...
I missed the full segment of this story last weeks on "Discovery Channel's @discovery.ca" program, but fortunately, the've put the segment online at their website. I seems that JPL (Jet Propulsion Laboratories - NASA essentially) is working on a solar-powered, single-footed robot frog. This seems like a GREAT idea for extra-terrestrial planet-surface locomotion. Check out […]
Well, we're already half-way through December and the days, snow, and cold temperatures keep rolling on. For those of you in need to get some last-minute shopping in before the holidays hit, you're in luck. For the next two weeks (until Dec 29th) we have two totally-awesome Arduino-type deals: Shieldpack (This promotion has ended. Better […]
Thursday is the new Wednesday, did you know? According to the new bylaw, you might have heard about this one... Okay, to be honest, we are late with the post... But doesn't that make it more exciting?! I bet it does, so here we go, the long-awaited links: Laser Origami We've got lasers. We like […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.