GroovyNoodle wire. Some is good; LOTS is better. We absolutely love our GroovyNoodle wire, with its super flexibility and silicone-jacket insulation in 7.5M "casual use" spools. For more ambitious projects that need more length, we now have our GroovyNoodle in value-priced 50 meter spools! It's more of our favorite 24AWG wire with a whopping 40 […]
DIY LED Fosshape Horns
Solar botics
November 17, 2016
A handy tutorial explaining how to put together the RGB LED Horns. Make your own, or get a kit with everything included (except for the paint).
Supplies:
Fosshape 300
2 x slow scroll RGB LED
2 x coin cell batteries
conductive thread
2 x coin cell battery holder - sewable
2 x pieces of velcro (hook side)
dimensional fabric paint (like this) - not included in the kit
Tools:
scissors
needle
heat gun
needlenose pliers
clear nail polish - optional
Step 1. Pattern
Cut out your own pattern - a simple triangle and a circle for the base.
Step 2. Shape the horn
Sew the triangle along the long edge. Shrink and form it over the heat gun - make sure to watch the fabric, when heated too much it will melt and form holes. Instead of trying to form the hot Fosshape with your hands, the best way to harden the shape is to hold it above the heat gun making sure to heat it evenly and let it shrink. Shrink the bases too while keeping them flat, but don't sew them on yet.
Step 3. LEDs preparation
With needlenose pliers curl up the LED legs and bend them 90 degrees so that the loops sit flat when the LED is facing up.
Step 4. Battery holder
Grab the battery holder, a coin cell and the base and attach the LED using conductive thread. Make sure the polarity of LED and battery are correct. If everything is wired right the LED will light up.
Step 5. Sew the base
Sew the base to the horn like shown and add a little tab of Fosshape and Velcro to the opposite side in order to keep it in place. Paint some clear nail polish on the bottom of the horns to isolate the conductive thread from touching the metal of the hair clip. Alternatively, you can fluff up the small scraps of Fosshape and fuse them over the stitches to protect the conductive thread.
Step 6. Paint
Embellish the horns with a pattern of your choice using the Tulip paint. It will take about 4 hours to dry. The Fosshape disperses the light quite nicely.
Step 7. Hair clip
Hot glue the hair clips to the bottom of each horn. Alternatively, you can sew the finished horns to hair clips or a head band.
MORE POSTS
New Synapse Stuff n' Stuff
Well. Hello there. It's been a while, hasn't it? Have have you been doing? How did that thing end up going for you? And those mutual acquaintances of ours? All doing well, we hope. Except for that one mutual acquaintance. You know, the one with the eye patch and kangaroo. I don't know about you, […]
Friday New Product: LED Strings, Snowfla...
Festive occasions are right around the corner so we thought we’d treat you to some shiny stuff. In these times of heightened economic activity (I mean mostly gift giving) some super bright 2.8Watt LEDs and tiny SMD LEDs on a wire that come in a variety of brilliant colours might come in handy for the […]
Hello...? Is this thing on....?
This is was just a Test. This is a test of the Dave broadcasting system. If this was a real Dave, you'd be notified what to do in the eventuality that you met a real Dave. This has been a test of the Dave broadcasting system. *Beeeeeep* Ok, it seems like we've got […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.