Finally, the freezing temperatures are somewhat over, and the outside seems almost livable, as opposed to run-for-your-life-or-else-you-freeze-able. Our links also, no matter the season, stay well-selected and non life-threatening. Photosynthesis-based Table Table that harvests energy of the sun by Dutch designer Marjan Van Aubel, via Designboom. Visualizing Sorting Algorithms Sorting algorithms are always interesting to […]
DIY Halloween RGB LED Kitty Ears
Solar botics
October 10, 2016
Simple cosplay cat ears made out of Fosshape, decorated with rhinestones and complete with RGB LEDs for color changing effect.
Materials:
- Fosshape 300
- 2 x slow scroll RGB LEDs
- 2 x CR2032 coin cell batteries
- 2 x coin cell battery holders
- 100 flatback rhinestones
- 2 x hairclips
- fake fur
- steel ball chain
Tools:
- scissors
- heat gun/steamer
- glue gun
- needle and thread
Step 1: Cut out the paper template
Define the height you want the ear to be - by holding a ruler up to you head (highly scientific approach) - and build a triangle similar to shown. You can use these shown measurements as a guidelines - but your proportions might be a little different.
Adjust the shape to have the curves following a more natural outline of the ear. Cut out the paper triangles..
Step 2: Cut out Fosshape
Trace the template onto the Fosshape. Cut out 2 large shapes and 4 smaller shapes for the base of the ear (two bases per ear).
Step 3: Sew the ear parts together
Sew each ear shape to one base:
Step 4: Harden the Fosshape
Now shape and harden the ears using a steamer or heat gun. They will shrink about 1.5 times (left ear treated with heat and right one not yet shown for comparison), so take that into consideration when choosing the final product size.
Step 5: Attach the hair clip
Sew the second bottom to the ear and insert the hair clip. Heat shrink the bottom layer.
Step 6: LED
Insert the LED into the inside of the ear with legs poking out from the other side.
Step 7: LED Battery
Insert the legs into the battery holder so that the longer (positive) leg is closer to the outside.
Insert the battery (positive side facing out) - it should be very snug. If everything is done correctly, your LED should light up right away. If not, then readjust the LED legs until the light is on.
Bend the LED legs as shown above, kind of in a Z shape: 1st bend near the top of LED, towards the top of the ear, and second the opposite direction so that the whole contraption sits flat against the surface.
Stitch the holder down using the holes provided. Use some hot glue to secure the holder to the fabric if needed.
Step 8: Rhinestones
Now the fun part - use hot glue to attach the flatback rhinestones to the inside of the ear.
Step 9: Fur
Use small tufts of fake fur to disguise the bottom of the ear. Sew them in place.
Step 10: Finishing
Optional - use some cord/ribbon (in this case a ball chain) to finish the ear edges!
MORE POSTS
Project: LED Earrings
The idea of adorning oneself with glowing bits has been around forever, but instead of smearing ourselves with phosphorescent jellyfish or placing fireflies in ears like some uncivilized cavemen we went for simple LED earrings. We made a build that involves a simple slow-scroll RGB LED and a few reflective bits to bounce that pretty […]
New Product Return Policy
We've been having our usual post-Christmas trickle of product returns (for free support), and we're noting more-than-usual levels of incomplete paperwork on the parcels. If proper paperwork isn't done, the shipping company tries to bill us for customs and duties on the products that have already been paid. This leads us to a new policy […]
Ardweeny & Strandbeest Make An Exce...
So we've just released a ton of awesome little bundles for our Ardweenys, and you're thinking "Wow, what would I do with all those?". Well friend, why not build a Strandbeest with an Ardweeny for a brain? For those few who aren't familiar with a Strandbeest (or don't know it by name), they are the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.