Hi all. It's coming up time for the annual Western Canadian Robot Games on May 13th, and as per usual, Solarbotics will be hosting our post-event wind-down. Interested in coming? Let us know here!
Simple cosplay cat ears made out of Fosshape, decorated with rhinestones and complete with RGB LEDs for color changing effect.
Step 1: Cut out the paper template
Define the height you want the ear to be - by holding a ruler up to you head (highly scientific approach) - and build a triangle similar to shown. You can use these shown measurements as a guidelines - but your proportions might be a little different.
Adjust the shape to have the curves following a more natural outline of the ear. Cut out the paper triangles..
Step 2: Cut out Fosshape
Trace the template onto the Fosshape. Cut out 2 large shapes and 4 smaller shapes for the base of the ear (two bases per ear).
Step 3: Sew the ear parts together
Sew each ear shape to one base:
Step 4: Harden the Fosshape
Now shape and harden the ears using a steamer or heat gun. They will shrink about 1.5 times (left ear treated with heat and right one not yet shown for comparison), so take that into consideration when choosing the final product size.
Step 5: Attach the hair clip
Sew the second bottom to the ear and insert the hair clip. Heat shrink the bottom layer.
Step 6: LED
Insert the LED into the inside of the ear with legs poking out from the other side.
Step 8: Rhinestones
Now the fun part - use hot glue to attach the flatback rhinestones to the inside of the ear.
Step 9: Fur
Use small tufts of fake fur to disguise the bottom of the ear. Sew them in place.
Step 10: Finishing
Optional - use some cord/ribbon (in this case a ball chain) to finish the ear edges!
Hi all. It's coming up time for the annual Western Canadian Robot Games on May 13th, and as per usual, Solarbotics will be hosting our post-event wind-down. Interested in coming? Let us know here!
Hi all. The staff at Solarbotics/HVW Technologies has been worked hard these last six weeks leading up to the winter holiday, so we'll be open again December 27/28, and again for regular hours January 2nd. Hope the holidays are good to you too! Regards, Dave Hrynkiw President, HVW Technologies/Solarbotics Ltd.
We will be so emotionally moved by the celebration of GPS Day tomorrow (the 14th) that we'll be taking Monday, February 16th off to recuperate. Go ahead and place orders or send emails - we'll get right back to you and continue shipping on Tuesday when we resume all business as usual. If you want […]
... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!): Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.