Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own. After some trial and error (due […]
Cool project
Dave Hrynkiw
January 12, 2003
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it:
Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ Uses all smd parts except Main Cap and PDs. Parts 1 x SB VPM vibrating disk motor 2 x SFH203PFA Photodiodes 1 x 74AC240 (SOIC) 2 x .22uF 16 Volt smd cap Miller SE... 1 x Panasonic BP2422 Solar Cell 1 x MN1382-J (smd) 1 x ZN2106G (SOT223) 1 x SB Small 1000uf cap 1 x TMMBAT42 (smd schottky diode) 1 x .22uF 16 Volt smd cap It turns a small amount but it does function well. Maybe a bigger cap like 3300uF in the next one. I temporarily gave up on Fled and Fred heads and opted for the very low part count and easy freeformability of the Solarbotics ShokPhoto Head Circuit. https://www.solarbotics.com/beam/circuits.asp Thanks SB!!!
He's also posted links to the videos of it here.
Due to bandwidth constrictions on his present server, we're mirroring the large video file here.
Nice job, Neil!
MORE POSTS
Maker Faire was a blast!
Well, we've been back for a few weeks now, and the demobots still have to be unpacked. It was a blast. From what we understand, attendance was up almost 50% over last year. Traffic was backed-up from the local highway to the fairgrounds. There were LOTS of new exhibits. We should know - we've been […]
Monday New Product: Grove Sensor, Joysti...
Grove - Loudness Sensor $7.68 Detect sound with this well-engineered Grove loudness sensor. Grove - Thumb Joystick $7.68 A handy Grove module thumb-joystick. Grove - 3 pin to Grove 4 pin converter cable $.588 Add your traditional 3-pin GVS (Ground / Voltage / Signal) device to a Grove plug. Grove - Servo Branch Cable $5.88 […]
Wheee! They're here - the new RW2!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.