Being in Canada, October is practically the doorstep of winter. Some places get a full three months of autumn, but for us it's one big multicolored blur before everything gets covered in white. Sure, that means that winter takes up half the year. But do you know what it also means? Thanksgiving comes almost a […]
Cool project
Dave Hrynkiw
January 12, 2003
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it:
Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ Uses all smd parts except Main Cap and PDs. Parts 1 x SB VPM vibrating disk motor 2 x SFH203PFA Photodiodes 1 x 74AC240 (SOIC) 2 x .22uF 16 Volt smd cap Miller SE... 1 x Panasonic BP2422 Solar Cell 1 x MN1382-J (smd) 1 x ZN2106G (SOT223) 1 x SB Small 1000uf cap 1 x TMMBAT42 (smd schottky diode) 1 x .22uF 16 Volt smd cap It turns a small amount but it does function well. Maybe a bigger cap like 3300uF in the next one. I temporarily gave up on Fled and Fred heads and opted for the very low part count and easy freeformability of the Solarbotics ShokPhoto Head Circuit. https://www.solarbotics.com/beam/circuits.asp Thanks SB!!!
He's also posted links to the videos of it here.
Due to bandwidth constrictions on his present server, we're mirroring the large video file here.
Nice job, Neil!
MORE POSTS
'Twas the night before Christmas...
'Twas the night before Christmas and all through the shop Not a creation was stirring (except the Turbot!). All robots had been packed and shipped with care, With hope, to their destination, they soon would be there. The bosses and staff were heading home straight To settle down to gift wrapping, probably 'til late. When out […]
The Solarbotics GraviTrack Marble Machin...
Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family. Elegant, swooping hands pass marbles to each other to the top of a sweeping multi-level track, available in either solar or battery configuration! Approximately twice as wide as our spiral Solar or Battery Marble machine kits, the GraviTrack is still desk-top […]
New Product: Connectors
150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.