We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it:
Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ Uses all smd parts except Main Cap and PDs. Parts 1 x SB VPM vibrating disk motor 2 x SFH203PFA Photodiodes 1 x 74AC240 (SOIC) 2 x .22uF 16 Volt smd cap Miller SE... 1 x Panasonic BP2422 Solar Cell 1 x MN1382-J (smd) 1 x ZN2106G (SOT223) 1 x SB Small 1000uf cap 1 x TMMBAT42 (smd schottky diode) 1 x .22uF 16 Volt smd cap It turns a small amount but it does function well. Maybe a bigger cap like 3300uF in the next one. I temporarily gave up on Fled and Fred heads and opted for the very low part count and easy freeformability of the Solarbotics ShokPhoto Head Circuit. https://www.solarbotics.com/beam/circuits.asp Thanks SB!!!
He's also posted links to the videos of it here.
Due to bandwidth constrictions on his present server, we're mirroring the large video file here.
Nice job, Neil!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
Kurt Moore of the Los Alamos National Laboratories has been busy using BEAM technology to bring technology training to the local schools in the Jemez Valley. Here's what one class did!
This is a very nice little demo package from Protel of a PCB layout program. It's an older package (they don't even have this on their website anymore), but works on any windows platform, unlike their current demo versions.
Just got the word that Gareth Branwyn posted a review of our Turbot on his website at Streettech.com. Thinking of getting a Turbot? Here's a straight-shooting review! While you're there, take a look at the Solaroller article that was just posted. Neat stuff!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.