We've had many requests to sell the parts needed to build the robots described in the books that we carry. You are now able to purchase the individual components needed to build your bot, but you're not required to take them all(Sorry, no instructions -- that's what the book is for!). If you've got resistors […]
Cool project
Dave Hrynkiw
January 12, 2003
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it:
Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ Uses all smd parts except Main Cap and PDs. Parts 1 x SB VPM vibrating disk motor 2 x SFH203PFA Photodiodes 1 x 74AC240 (SOIC) 2 x .22uF 16 Volt smd cap Miller SE... 1 x Panasonic BP2422 Solar Cell 1 x MN1382-J (smd) 1 x ZN2106G (SOT223) 1 x SB Small 1000uf cap 1 x TMMBAT42 (smd schottky diode) 1 x .22uF 16 Volt smd cap It turns a small amount but it does function well. Maybe a bigger cap like 3300uF in the next one. I temporarily gave up on Fled and Fred heads and opted for the very low part count and easy freeformability of the Solarbotics ShokPhoto Head Circuit. https://www.solarbotics.com/beam/circuits.asp Thanks SB!!!
He's also posted links to the videos of it here.
Due to bandwidth constrictions on his present server, we're mirroring the large video file here.
Nice job, Neil!
MORE POSTS
Free Ardweeny with ARDX!
Well, it's been one of those weeks where we don't have anything to post, so... HEY LOOK! THE ARDY IS BACK! From now until the end of March, the ARDY bundle gets you the Arduino Experimenter's Kit with a free Ardweeny. Oh, and did we mention that we just took a picture of (almost) all […]
Robothon workshop almost full!
We've got 20 spots, and 17 seats are filled. If you're planning on being at the Seattle Robothon and want to get in on an introductory Sumovore Workshop, now's the time to check out the registration page! Read More...
Well, that was a busy December...
Hi all. The staff at Solarbotics/HVW Technologies has been worked hard these last six weeks leading up to the winter holiday, so we'll be open again December 27/28, and again for regular hours January 2nd. Hope the holidays are good to you too! Regards, Dave Hrynkiw President, HVW Technologies/Solarbotics Ltd.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.