The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.
Cool project
Dave Hrynkiw
January 12, 2003
Neil Sandstrom from the BEAM mailing list recently posted a notice about his "ShokHead" circuit built from our tutorial. What makes this project a bit different is that he mounted it on a VPM motor, so it's all self-contained. Here's what he says about it:
Just finished!!! Check it out it is really small!! http://groups.yahoo.com/group/beam/files/Psyclesam/ Uses all smd parts except Main Cap and PDs. Parts 1 x SB VPM vibrating disk motor 2 x SFH203PFA Photodiodes 1 x 74AC240 (SOIC) 2 x .22uF 16 Volt smd cap Miller SE... 1 x Panasonic BP2422 Solar Cell 1 x MN1382-J (smd) 1 x ZN2106G (SOT223) 1 x SB Small 1000uf cap 1 x TMMBAT42 (smd schottky diode) 1 x .22uF 16 Volt smd cap It turns a small amount but it does function well. Maybe a bigger cap like 3300uF in the next one. I temporarily gave up on Fled and Fred heads and opted for the very low part count and easy freeformability of the Solarbotics ShokPhoto Head Circuit. https://www.solarbotics.com/beam/circuits.asp Thanks SB!!!
He's also posted links to the videos of it here.
Due to bandwidth constrictions on his present server, we're mirroring the large video file here.
Nice job, Neil!
MORE POSTS
Useless (Xmas) Machines!
We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today! What comes in the bundle? Pretty much everything you need to successfully build a […]
New Product: Microcontrollers & Ras...
SparkFun Electric Imp Breakout $17.48 The SparkFun Electric Imp breakout board makes it easy to experiment with your Electric Imp IoT project. ESP-12F AP+STA Remote Serial Port WIFI Controller / Module $9.38 The ESP8266 (ESP-12F AP+STA) is a nice "Internet of Things" microcontroller with Wifi (or as a Wifi bridge for your project) Adafruit Metro […]
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.