New updateWe've got confirmation from all three Turbot winners! They are: Scott Williams of New Jersey, USA, and... Amin Younes of New York State, USA! Emiel Roumen of the Netherlands! ps: Turbot kit looks like it'll be ready real soon!
So as we mentioned last week, our contest to name our upcoming GVS Ardweeny Backpack had come to a close. We've had a chance to sift through all the submissions, and the results are IN. This would be the part where someone hands someone else a secret-lookin' envelope, but because I can't spot any envelopes within reaching distance of where I'm sitting, so we'll skip that part. We're going to name the new Ardweeny thinger...
[drumroll] (...I may not have an envelope, but I can drum on my desk)
THE MULTIPACK!
Which means that, technically, we didn't pick any of the submissions. But we got inspiration from "Multitask", which was submitted by Brayton, so he'll get our first place prize (an Ardweeny, TTLyFTDI USB-to-TTL Cable Adapter, and a newly-christened Multipack).
BUT WAIT, THAT'S NOT ALL! We got a lot of suggestions we liked, so we'd like to award some more prizes while we're at it. Particularly to Tim for his "Nerdy Dozen" suggestion - it got far too many chuckles around the office. And for no other reason than amusing the staff with such a genius name, we're going to send him a first place prize too. And just to round things off, we'd like to throw out an honourable mention to Geoffrey for his clever (and appropriate) "Medusa". We'll be sending a fresh new Ardweeny his way for winning in the "Reference New Technology to the Creepiest Figure from Greek Mythology" category.
Congrats to all the winners - we'll be getting in touch with you shortly to send you your goods. Our thanks goes out to everyone else that submitted names!
And to celebrate the end of the contest, we're going to release some new stuff. For this week's batch, we have a fistful of REALLY neat wireless items. And a single LED to round it off (hey, you need to have something to turn on/off using your fancy new wireless tech).
Seeedstudio Bluetooth Bee $23.95 Bluetooth! XBee! Arrgh - which way to go? Well, the Bluetooth Bee lets you jam a Bluetooth SPP module into an existing Xbee socketed project! |
|
SeeedStudio 315Mhz RF Link Kits with Encoder and Decoder $9.95 This 315MHz RF transmitter/receiver set is a simple 100M remote-operation control link. |
|
Seeedstudios Long Range RF Link Kits w/ Encoder and Decoder $18.95 You want to make this thing talk to that thing waaay over there? Try the Seeedstudio super-long range 433Mhz RF link bundle! They're claiming 2KM range for wireless data transport & remote control use! |
|
Nanode v5 Kit $39.99 Nanode is an open source Arduino-like board that has in-built web connectivity. It is a low cost platform for creative development of web connected ideas. |
|
Wicked Node Kit $15.95 This ATTiny24-based 433MHz platform is a remote sensor base. Add up to 4 sensors (analog or digital), and configure the board's broadcast schedule! |
|
Wicked Receiver Shield Kit $11.00 Want to do some wireless communication for the Arduino, but on the cheap? The Wicked Devices 433MHz Receiver Shield will give your Arduino-compatible ears! |
|
5mm Common Cathode RBG LED $1.00 Diffused lense RGB LED with high degree of brightness and long life-span. |
Not only did we have a dramatic conclusion to our contest, but we've released some fresh products. Everyone is a winner! Ugh, that phrase brings back painful memories of t-ball...
New updateWe've got confirmation from all three Turbot winners! They are: Scott Williams of New Jersey, USA, and... Amin Younes of New York State, USA! Emiel Roumen of the Netherlands! ps: Turbot kit looks like it'll be ready real soon!
Today we are going to be taking a look at one of our favorite go-to materials for easy molding and quick repair, Caprolactone Thermoplastic! This plastic, more commonly known as ShapeLock, Friendly Plastic, Instamorph or Polymorph, is a biodegradable polyester with a low melting point. When solid, it has physical properties of a very tough, […]
Arc Reactor Kit Build Instructions Here's a quick blog on how to assemble the Arc Reactor Kit - Limited Edition. 1. Remove brown paper from all 4 acrylic pieces - the pieces are actually clear, so remove all the paper from both sides.
Well ladies and gentlemen, I'm sure we can all say at this point that our current website is in need of a bit of love (we certainly think so). Now's your chance to speak up and tell us what kind of shiny new features you'd like to see implemented in the new site. We've already […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.