We've had some requests on exactly what do the pushpins do. So, we added videos for two of them. Push Pin 1 (Masher Point) Push Pin 3 (Chisel Point)
Circuit: Stepper Motor
Dave Hrynkiw
July 12, 2007
This is a neat little one-chip circuit we originally tuned for use with our "SM1" Stepper motors. We've presently sold out of the motor, but this circuit has proved to be a good unidirectional (1-way) driver for small stepper motors. Parts required are:
- 74AC240 Octal buffer chip
- 4 x CP0.1µF capacitors
- 100k resistor
- 2 x 47k resistors
MORE POSTS
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
Product Feature: Bare Conductive Project...
We are always on the search of cool technology, so when we came across Bare Conductive, we thought: pizza! what a great find! Bare Conductive is a design and technology company from the UK that makes sensing tools for engineers, designers, and makers. They produce a line of electrically conductive paint, capacitive sensor hardware and a […]
Holiday Hours
This may come as a bit of a shock to you, but the hands that package your orders actually belong to humans. Sure, we may be a robot company, but robo-hands just aren't quite up to spec for what we need to do. So for the moment we're staffed by a contingent of mortals, and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.