Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! 3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. SparkFun Pi Wedge B+ $9.55 A prototyping Wedge for Raspberry Pi B+ that allows you to use a shield and a protoboard […]
Circuit: Lightstorm
Dave Hrynkiw
July 12, 2007
(PDF Version) GIF Link
Some of you may have found the LightStorm Pummers that Mark Tilden has made using some neat looking plastics. We've built our own variation of the circuit, which is a dark-activated, quad-bicore pseudo-random chaos generated, dual pummer circuit.
Parts required are:
Dark Turn on Circuit
- Solarcell (SB Part SC2433)
- 1F 2.5V (SB Part CP1.0F) capacitor
- 1 Germanium Diode (SB Part D2)
- 100k Trimpot (SB Part RT100k)
- 2n3904 transistor (SB Part TR3904)
- 2n3906 transistor (SB Part TR3906)
Pummer Circuit
- 74HCT240 (SB Part 74HCT240)
- 2 x 1000uF Capacitor (SB Part CP1000)
- 2 x UltraBright LEDs (SB Part UBLED-R)
- 2 x 100k Resistors (SB Part 100k)
- 2 x 22uF Capacitors (SB Part CP22)
- 4 x 0.22uF Capacitors (SB Part CP0.22uF)
- 2 x 2 MegaOhm Resistors (SB Part R2.0M)
Pummer Circuit
- 74HCT240 (SB Part 74HCT240)
- 8 x 2n3904 Transistors (SB Part TR3904)
- 8 x CP0.22µF Capacitors (SB Part CP0.22uF)
- 8 x 1k Resistors (SB Part R1k)
- 2.2 MegaOhm Resistor (SB Part R2.2M)
- 3 MegaOhm Resistor (SB Part R3M)
- 3.3 MegaOhm Resistor (SB Part R3.3M)
- 4.3 MegaOhm Resistor (SB Part R4.3M)
MORE POSTS
Wednesday Cool Links: Theremin Goggles, ...
Shooting analog pictures, shooting bullets underwater, shooting… theremin noises from goggles, shooting… human-powered helicopters! if that doesn’t make any sense, see the links below: Steampunk theremin goggles A wicked build by [Sarah] - theremin steampunk goggles. Photo sensor will feel the amount of light and the slider would adjust the pitch of the sound produced. Check […]
The Solarbotics DIY Island & Repair...
What's the biggest event for Solarbotics in the spring? Calgary Comic Expo on April 27-30! This year we are going to be there as part of the DIY Island (booth 110) at BMO Centre, Calgary Stampede Park. DIY Island is a booth space shared between Solarbotics, Repair Oasis, Protospace and MakerFaire Calgary. Solarbotics will be […]
Maker Faire was a blast!
Well, we've been back for a few weeks now, and the demobots still have to be unpacked. It was a blast. From what we understand, attendance was up almost 50% over last year. Traffic was backed-up from the local highway to the fairgrounds. There were LOTS of new exhibits. We should know - we've been […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.