Circuit: Herbie by Randy Sargent

We're sorry to see Becky go off to work with her husband on their own endevours, but that's ok; we have Robin now - a most worthy replacement. Bye Becky - we'll miss you! Come back sometime and say hi to Robin, ok?

Here's something to take a boo at a workshop by Tom Mair and a Grade-5 class. From his message to the BEAM mailing list: Last year I helped Mrs. Corbett's Grade 5 class build robots and we had a blast (see a review here http://www.aasland.com/hcrd.html). Well, this year we are doing it again. We're building […]

It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.

Other than the new goodies, we have one more thing to announce: Solarbotics, as an official MakeFashion partner, has been supporting local and international designers by consulting, providing materials, tech support and snacks. One of the projects we have been working at is Pumping Fashion Lit (by Dee Fontans and Eric Willis). It is featured […]