We've been getting many requests for additional inventory of our popular Push Pogo Pins. Well, we've ordered a batch, and we'll post an update when they're finally in. Sorry, no better ETA than that!
What is this? A Christmas Tornado? A Santa Storm? Yes... or simply even just a pleasant centerpiece (with a wee bit of catnip) to taunt the kitty with. Our staff has been putting on their elf hats, browsing the isles and creating some festive technobling-in-a-jar with by adding some LEDs to a Chritmas standby: The Holiday Jar.
The essentials of this project are primarily found at your local craft and dollar-store, or even out of the dredges of your holiday decorating box. The core decorations in the jar can any number of festive doodahs but we settled on some white/gold garland, and a Christmas tree ornament. A 16oz jar houses the mix, along with a warm white LED string added for the pleasant glow.
To keep the installation tidy, we're using our 2-coin cell battery holder, a 3-meter long warm white LED string, and 2 x CR2032 coin cells, with some clear heatshrink to keep the connections clean. But at this low voltage, even tape or hot-glue will suffice.
For this project, we will only need the essentials for a basic soldering job. This consists of a soldering iron, solder, wire cutters, and wire strippers. If you don't have heatshrink, you may also need some tape or hot glue.
Let's start with preparing the electronics and soldering them together.
The end result:
Now it's time to prep our jar and insert the LED string.
Now that our decorations are in place and our LED's have been added, it's time to attach our battery pack to the underside of the jar lid. To do this we've used double sided sticky tape, but you could just as easily use hot glue or tape.
Now that everything has been assembled you should have a cool and crafty holiday gift to present to your friends and family for the season of gift giving!
We've been getting many requests for additional inventory of our popular Push Pogo Pins. Well, we've ordered a batch, and we'll post an update when they're finally in. Sorry, no better ETA than that!
For those of you with the Basic Stamp 2 addition* to the Sumovore here is some Code to get you started. You will need to download the Editor from Parallax to load and edit the code. *The BS2 add on board will be up for sale very soon
Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to […]
So it turns out that we've underestimated the email services of the world. This has led to frustrations for some of our loyal users in reclaiming their email with the new website. We're sorry people. Completely our bad on that one. The good news is that testing so far shows that the issues should now […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.