Howdy folks! We just wanted to let you know that our office will be closed for the Holiday Monday, May 22. All orders submitted over the weekend will be filled first thing on Tuesday, May 23. Happy May Long Weekend!
What is this? A Christmas Tornado? A Santa Storm? Yes... or simply even just a pleasant centerpiece (with a wee bit of catnip) to taunt the kitty with. Our staff has been putting on their elf hats, browsing the isles and creating some festive technobling-in-a-jar with by adding some LEDs to a Chritmas standby: The Holiday Jar.
The essentials of this project are primarily found at your local craft and dollar-store, or even out of the dredges of your holiday decorating box. The core decorations in the jar can any number of festive doodahs but we settled on some white/gold garland, and a Christmas tree ornament. A 16oz jar houses the mix, along with a warm white LED string added for the pleasant glow.
To keep the installation tidy, we're using our 2-coin cell battery holder, a 3-meter long warm white LED string, and 2 x CR2032 coin cells, with some clear heatshrink to keep the connections clean. But at this low voltage, even tape or hot-glue will suffice.
For this project, we will only need the essentials for a basic soldering job. This consists of a soldering iron, solder, wire cutters, and wire strippers. If you don't have heatshrink, you may also need some tape or hot glue.
Let's start with preparing the electronics and soldering them together.
The end result:
Now it's time to prep our jar and insert the LED string.
Now that our decorations are in place and our LED's have been added, it's time to attach our battery pack to the underside of the jar lid. To do this we've used double sided sticky tape, but you could just as easily use hot glue or tape.
Now that everything has been assembled you should have a cool and crafty holiday gift to present to your friends and family for the season of gift giving!
Howdy folks! We just wanted to let you know that our office will be closed for the Holiday Monday, May 22. All orders submitted over the weekend will be filled first thing on Tuesday, May 23. Happy May Long Weekend!
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
The Western Canadian Robot Games is quickly approaching! May 10 & 11; SAIT Heart Building. Solarbotics will be there again, sponsoring (among other things) our own SolarSpeeder race. Aim your solarspeeder through a 4" gap in a wall 8 feet away, and win a ScoutWalker II kit! No registration required - just come on down […]
BOY it's been a busy season for us. Our pick and place has been moving at a blurring pace (while I've been baking the boards), and we're getting the SB-Freeduino 2.3 back online. What's new from the v2.2? Not too much - we've cleaned and tidied up the overlay, incorporated some new Uno-style annotations on […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.