Our friends at Bare Conductive, whose awesome lineup of products we carry, shared a few more interesting how-to tutorials (previously).
What is this? A Christmas Tornado? A Santa Storm? Yes... or simply even just a pleasant centerpiece (with a wee bit of catnip) to taunt the kitty with. Our staff has been putting on their elf hats, browsing the isles and creating some festive technobling-in-a-jar with by adding some LEDs to a Chritmas standby: The Holiday Jar.
The essentials of this project are primarily found at your local craft and dollar-store, or even out of the dredges of your holiday decorating box. The core decorations in the jar can any number of festive doodahs but we settled on some white/gold garland, and a Christmas tree ornament. A 16oz jar houses the mix, along with a warm white LED string added for the pleasant glow.
To keep the installation tidy, we're using our 2-coin cell battery holder, a 3-meter long warm white LED string, and 2 x CR2032 coin cells, with some clear heatshrink to keep the connections clean. But at this low voltage, even tape or hot-glue will suffice.
For this project, we will only need the essentials for a basic soldering job. This consists of a soldering iron, solder, wire cutters, and wire strippers. If you don't have heatshrink, you may also need some tape or hot glue.
Let's start with preparing the electronics and soldering them together.
The end result:
Now it's time to prep our jar and insert the LED string.
Now that our decorations are in place and our LED's have been added, it's time to attach our battery pack to the underside of the jar lid. To do this we've used double sided sticky tape, but you could just as easily use hot glue or tape.
Now that everything has been assembled you should have a cool and crafty holiday gift to present to your friends and family for the season of gift giving!
Our friends at Bare Conductive, whose awesome lineup of products we carry, shared a few more interesting how-to tutorials (previously).
Just a quick note to remind everyone that we are closed on Remembrance Day - Tuesday November 11 and will resume responding to phone calls and emails tomorrow.
We've had some requests about our own demo Nano robot sumo "BittyBad", which uses a pair of GM15 gear motors. On the GM15 detail page, you'll see a picture of it! It features 2 GM15 gear motors, two 90mA/h LiPoly 3.7V batteries (in series), two "ProxDots" objects sensors, a pair of edge-sensors and a (gasp!) […]
Mega Protoshield for Arduino $20.75 The Arduino Mega has LOTS of I/O. This Mega Protoshield by Adafruit breaks it all out for easy access and prototyping. Single Panel Breadboard with Terminals $13.00 830 contact single panel breadboard with 3 banana terminal jacks. Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.