Hi!
What is this? A Christmas Tornado? A Santa Storm? Yes... or simply even just a pleasant centerpiece (with a wee bit of catnip) to taunt the kitty with. Our staff has been putting on their elf hats, browsing the isles and creating some festive technobling-in-a-jar with by adding some LEDs to a Chritmas standby: The Holiday Jar.
The essentials of this project are primarily found at your local craft and dollar-store, or even out of the dredges of your holiday decorating box. The core decorations in the jar can any number of festive doodahs but we settled on some white/gold garland, and a Christmas tree ornament. A 16oz jar houses the mix, along with a warm white LED string added for the pleasant glow.
To keep the installation tidy, we're using our 2-coin cell battery holder, a 3-meter long warm white LED string, and 2 x CR2032 coin cells, with some clear heatshrink to keep the connections clean. But at this low voltage, even tape or hot-glue will suffice.
For this project, we will only need the essentials for a basic soldering job. This consists of a soldering iron, solder, wire cutters, and wire strippers. If you don't have heatshrink, you may also need some tape or hot glue.
Let's start with preparing the electronics and soldering them together.
The end result:
Now it's time to prep our jar and insert the LED string.
Now that our decorations are in place and our LED's have been added, it's time to attach our battery pack to the underside of the jar lid. To do this we've used double sided sticky tape, but you could just as easily use hot glue or tape.
Now that everything has been assembled you should have a cool and crafty holiday gift to present to your friends and family for the season of gift giving!
Hi all. I went through the effort to invite y'all into our new digs, but didn't stand here at the door to welcome you in! So sorry... Please excuse the sawdust. I'm still pushing the people that push the brooms around here. No matter - everything will be tidied up in no time. The website […]
Well we hate to break it to you, but the PICAXE-40X1 has kicked the bucket. Shuffled off the mortal coil. Wacked, given up the ghost, became living-challenged, croaked, sprouted wings, snuffed out. "IT'S NOT DEAD! JUST PINING FOR THE FJORDS!" Well, that's not the case. But is does (did?) have beautiful plumage. But that's okay […]
Ok, we were fed up with the strange pinouts on the L298 motor driver, and decided to do something about it. The result is the Solarbotics L298 Compact Motor Driver. It happens to be the same size as a BEP tile, offers four status LEDs, plugs for easy wiring, and screw terminals for motor and […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.