Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
Bulbdial on Steroids - the Chinook Shado...
Dave Hrynkiw
March 23, 2012
We've been working with the Chinook Mall since they did a retrofit a decade ago, where they really amped up the mall, making it the keynote shopping centre of Calgary. One of their features is the "Time Capsule Clock", which sits in the floor of the center court, where a 1000 year time capsule waits under a clock.
Time passes fine for the capsule, but time did not treat the clock too well at all. Since clocks are generally supposed to be wall-mounted affairs, the constant beating it took from floor cleaners and pedestrians finally make it die an early death. We were called in periodically to repair the clock hands and reset the time until they finally gave us the go-ahead to design them a replacement. A much better engineered replacement - a ShadowClock!
Inspired by the sheer sleekness and appeal of the Evil Mad Scientist's Bulbdial, we adapted the idea to a larger scale, with 2.5X the LEDs. We finally installed the project last Monday, and just finished putting up a Flickr roll detailing the project.
Want one of your own? Sorry - we only have the backup unit left for our own nefarious purposes, but we're working on a kit!
MORE POSTS
Wednesday Cool Links
If I could choose a super power, I would pick the ability to erase people's memory. And lucky for me, I've just been granted a free wish from The Magic Taco. Get ready, everyone. Pew! Done! Whew, now we never have to write a new post again. Check out these "new" links we prepared for […]
Friday New Product: Grove, Kossel and XB...
Seeed Raspberry Pi Breakout Board v1.0 $14.95 The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your Raspberry Pi with other components and modules. Grove - Light Sensor(P) $3.75 Panel mount light sensor from SeeedStudio. XBee WiFi Module - Wire Antenna $52.75 This is the XBee WiFi […]
Solarbotics at MAKE Faire - Proof!
See, I was actually there! Well, at least there's proof that I was. Here's an interview with Bashiba Grossman, showing off her 3D printed artwork. About 1/4 the way in, you'll see a suspicious man show up in the background. Nice hat, eh? Thanks to Floyd on the BEAM-List for pointing this out!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.