Bulbdial on Steroids - the Chinook Shado...

Dave Hrynkiw
March 23, 2012

We've been working with the Chinook Mall since they did a retrofit a decade ago, where they really amped up the mall, making it the keynote shopping centre of Calgary. One of their features is the "Time Capsule Clock", which sits in the floor of the center court, where a 1000 year time capsule waits under a clock.

Time passes fine for the capsule, but time did not treat the clock too well at all. Since clocks are generally supposed to be wall-mounted affairs, the constant beating it took from floor cleaners and pedestrians finally make it die an early death. We were called in periodically to repair the clock hands and reset the time until they finally gave us the go-ahead to design them a replacement. A much better engineered replacement - a ShadowClock!

Inspired by the sheer sleekness and appeal of the Evil Mad Scientist's Bulbdial, we adapted the idea to a larger scale, with 2.5X the LEDs. We finally installed the project last Monday, and just finished putting up a Flickr roll detailing the project.

Want one of your own? Sorry - we only have the backup unit left for our own nefarious purposes, but we're working on a kit!

 

 

MORE POSTS

December 6, 2010
As with baking...

...DON'T FORGET ABOUT THE OVEN. You'll burn the cookies while eating the dough! Just got a new LOUD oven timer to make sure somebody is standing over the PCBs when the timer is about up. Pick and place machines tend to drown out gentle oven beeps!

July 12, 2007
BEP Application: Pummer

The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.

August 25, 2005
Solarcell Comparison Datasheet

Hi all! We've distilled this year's solar cell summer-solstice tests into a nice, pretty set of PDF files. Want to know the power curves of our solarcells? Check it out here!

July 12, 2007
Circuit: Herbie by Randy Sargent

Although not a true BEAM robot, this simple schematic by Randy Sargent is small, simple, slick, and effective. My own version uses a pair of pager motors and three cells from a 9V rechargeable battery. Hard to get any simpler than this device!

1 5 6 7 8 9 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.