Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
We've been working with the Chinook Mall since they did a retrofit a decade ago, where they really amped up the mall, making it the keynote shopping centre of Calgary. One of their features is the "Time Capsule Clock", which sits in the floor of the center court, where a 1000 year time capsule waits under a clock.
Time passes fine for the capsule, but time did not treat the clock too well at all. Since clocks are generally supposed to be wall-mounted affairs, the constant beating it took from floor cleaners and pedestrians finally make it die an early death. We were called in periodically to repair the clock hands and reset the time until they finally gave us the go-ahead to design them a replacement. A much better engineered replacement - a ShadowClock!
Inspired by the sheer sleekness and appeal of the Evil Mad Scientist's Bulbdial, we adapted the idea to a larger scale, with 2.5X the LEDs. We finally installed the project last Monday, and just finished putting up a Flickr roll detailing the project.
Want one of your own? Sorry - we only have the backup unit left for our own nefarious purposes, but we're working on a kit!
Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.
AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]
You know, I had a page of our customer testimonials put together, and I just had the opportunity to sit and read it a bit. That's a pretty impressive page, even if I do say so myself! If you have any reservation about ordering from Solarbotics, I encourage you to take a quick look at […]
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.