Bulbdial on Steroids - the Chinook Shado...

Dave Hrynkiw
March 23, 2012

We've been working with the Chinook Mall since they did a retrofit a decade ago, where they really amped up the mall, making it the keynote shopping centre of Calgary. One of their features is the "Time Capsule Clock", which sits in the floor of the center court, where a 1000 year time capsule waits under a clock.

Time passes fine for the capsule, but time did not treat the clock too well at all. Since clocks are generally supposed to be wall-mounted affairs, the constant beating it took from floor cleaners and pedestrians finally make it die an early death. We were called in periodically to repair the clock hands and reset the time until they finally gave us the go-ahead to design them a replacement. A much better engineered replacement - a ShadowClock!

Inspired by the sheer sleekness and appeal of the Evil Mad Scientist's Bulbdial, we adapted the idea to a larger scale, with 2.5X the LEDs. We finally installed the project last Monday, and just finished putting up a Flickr roll detailing the project.

Want one of your own? Sorry - we only have the backup unit left for our own nefarious purposes, but we're working on a kit!

 

 

MORE POSTS

September 14, 2012
New Product. Just One. But Some Other St...

Here's our late and lame Friday post. It features one very lonely, depressed, and forgotten product from a week ago. But it blinks, so it can't be that sad, right? 5V RGB LED LPD8806 Stripxels (32 per meter) $35.00 These are very similar to the WS2801 RGB Stripxel, but feature the LPD8806 controller IC instead. […]

October 6, 2015
New Product: Grove, More Grove & Ko...

Seeed Grove - RTC $6.90 The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date, month and year information. Nidec SMD Vibra motor 1.3V DC, 105mA, 9500rpm $3.00 Surface-mount […]

May 10, 2012
Solarbotics at Bay Area Maker Faire ...S...

Guess what! Like every year, from May 19-20 Solarbotics is going to be at the Bay Area Maker Faire! Well, kinda. While we usually run a full booth to show off all our cool BEAM and Arduino stuff (we even ran a totally rockin' ARDX workshop last time), it unfortunately looks like costs have risen […]

September 22, 2011
RoboMaxx n' New Produxx

Are you on, in, under or around the state of Oregon? Do you have the ability with which to get thineself to Medford, which is located in Oregon, on October the 8th? If you answered 'yes' to most of the above questions, you might want to consider dropping in at RoboMaxx - an event which is […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.