It's been a while since we've had this kit online, but due to some diligence we've found materials to update and re-issue it! Using the licensed "MillerEngine" (which we find to be a substantial improvement over the old Solarengine), we've changed the kit with a new black circuit board and updated documentation. Check it out […]
Bulbdial on Steroids - the Chinook Shado...
Dave Hrynkiw
March 23, 2012
We've been working with the Chinook Mall since they did a retrofit a decade ago, where they really amped up the mall, making it the keynote shopping centre of Calgary. One of their features is the "Time Capsule Clock", which sits in the floor of the center court, where a 1000 year time capsule waits under a clock.
Time passes fine for the capsule, but time did not treat the clock too well at all. Since clocks are generally supposed to be wall-mounted affairs, the constant beating it took from floor cleaners and pedestrians finally make it die an early death. We were called in periodically to repair the clock hands and reset the time until they finally gave us the go-ahead to design them a replacement. A much better engineered replacement - a ShadowClock!
Inspired by the sheer sleekness and appeal of the Evil Mad Scientist's Bulbdial, we adapted the idea to a larger scale, with 2.5X the LEDs. We finally installed the project last Monday, and just finished putting up a Flickr roll detailing the project.
Want one of your own? Sorry - we only have the backup unit left for our own nefarious purposes, but we're working on a kit!
MORE POSTS
More interesting links on the inter-web....
Browsing around, I found another link regarding Mark Tilden & WowWee. From the website "AllNerdReview.com" (if that doesn't describe a roboticist...) comes article about a their visit to the New York Toy Fair (ok, so my web-browsing is a bit old). Enjoy... http://www.allnerdreview.com/TOYFAIR05/TF13.htm
Friday New Product: LilyTwinkle, Teensy ...
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]
Friday New Product: BusBoard Protoboards
Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise. PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard $3.75 A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects! PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard $6.82 For the ultimate in protoboard flexibility, here's […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.