Want a bumble-bee look to your robot tank? Intersperse our new GMT-Yellow treads into the link chain! You should even be able to use a yellow link as a opto-reflector in a wheel (err...tread?) encoder circuit. ALSO, we're the only place in North America you can get these new yellow tread links!
Thermal Master Thermal Imager
Solarbotics Ltd
January 20, 2025
These are thermal, not Infrared cameras, returning temperature data in a tight and tidy bundle that can be plugged into Android, IOS, and other USB devices (like Raspberry-Pi SBCs!).
What use is it? Here's what we've done with it over the last month:
- Did thermal house-leakage analysis using on my Android phone.
- Successfully diagnose a stuck-open thermostat on my truck (it was taking very long to heat up in our freezing Calgary winter).
- Detected a bruise forming on my forearm before it was visible
- Diagnose a bad voltage regulator on a motherboard
- Count animals in the park across the street
- Use some excellent open-source software to run it on a Rock Pi SBC for in-store demos
And it's small. The basic unit starts at just over $220, and there are models with additional macro-settings, pistol-grip mounts, and advanced software settings.
Presently not on the website yet, but it is available in-store at Active-Tech Calgary.
MORE POSTS
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Another New Gearmotor - The GM19!
Here's a funky motor for you - the GM19! Slightly larger than the other metal gearhead series (GM11-14), and with a larger motor, this 35:1 beasty looks like a good contender for building mini-sumos or other small, speed-hungry robots! But be warned: It is a bit strange. The gearhead is mounted askew to the motor, […]
Wednesday Links: Ballet, Draw-bots and K...
Yet another selection of hand-picked links from all over the interwebs: Visualizing Ballet .. using Lilypad Arduino. Looks beautiful, produces drawing-like results and helps dancers to trace their movements for necessary feedback. (Via Arduino blog) Tiny CNC-bot Beautiful little Piccolo, in it's second incarnation (first one was all clear acrylic). 3D printed Katana Case Is […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.