We'll be shut down for the Holiday long weekend this Friday July 1st. It's Canada-Day up here, but we will be open again July 4th. Happy Holiday, y'all!
Thermal Master Thermal Imager
Solarbotics Ltd
January 20, 2025
These are thermal, not Infrared cameras, returning temperature data in a tight and tidy bundle that can be plugged into Android, IOS, and other USB devices (like Raspberry-Pi SBCs!).
What use is it? Here's what we've done with it over the last month:
- Did thermal house-leakage analysis using on my Android phone.
- Successfully diagnose a stuck-open thermostat on my truck (it was taking very long to heat up in our freezing Calgary winter).
- Detected a bruise forming on my forearm before it was visible
- Diagnose a bad voltage regulator on a motherboard
- Count animals in the park across the street
- Use some excellent open-source software to run it on a Rock Pi SBC for in-store demos
And it's small. The basic unit starts at just over $220, and there are models with additional macro-settings, pistol-grip mounts, and advanced software settings.
Presently not on the website yet, but it is available in-store at Active-Tech Calgary.
MORE POSTS
Wednesday Links: Flashlights, Lanternbot...
Spring this year seems to be short on sunshine. To compensate for that, today's post is full of shiny things. And butterflies. Butterflies are always a good addition. Tilt Beam Flashlight Cute build, a diffuser of some sort would be a nice addition though, unless used for interrogation purposes. (by [Zach DeBord], via Hackaday) Soft […]
Closed on Monday August 6th
That's it. We've had enough. The weather is just too darn nice outside. So nice, in fact, that we quit. That's right, when Monday rolls around no one is even going to bother coming into the office. You heard us - we'll be closed on Monday, August the 6th. Go ahead and email and leave […]
Lulzbot 3D Printer Documentation and Res...
Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.