Thermal Master Thermal Imager

Solarbotics Ltd
January 20, 2025

These are thermal, not Infrared cameras, returning temperature data in a tight and tidy bundle that can be plugged into Android, IOS, and other USB devices (like Raspberry-Pi SBCs!).

What use is it? Here's what we've done with it over the last month:

  • Did thermal house-leakage analysis using on my Android phone.
  • Successfully diagnose a stuck-open thermostat on my truck (it was taking very long to heat up in our freezing Calgary winter).
  • Detected a bruise forming on my forearm before it was visible
  • Diagnose a bad voltage regulator on a motherboard
  • Count animals in the park across the street
  • Use some excellent open-source software to run it on a Rock Pi SBC for in-store demos

And it's small. The basic unit starts at just over $220, and there are models with additional macro-settings, pistol-grip mounts, and advanced software settings.

Snow = cold. 
Window opening = leakage!
Cold hand just removed from warm cheek
Forearm bruise registered slightly hotter just after injury (right on the "+). Using excellent
Android app can overlay live camera with the thermal camera feed. At the time, you could set "transparency" so you could still read the numbers under the overlay image, but when saving video, it makes the overlay 0% transparent. Usually you could read the P1 and P2 temperatures at the top left corner.

Presently not on the website yet, but it is available in-store at Active-Tech Calgary.

MORE POSTS

May 15, 2007
"Steady as she goes, steersman..."

Solarbotics / HVWTech will be on "maintenance mode" while the bulk of the staff go down to the MAKE Faire in San Mateo, California. The remaining staff have begged for some relief to make the week go easier, so we are not going to be doing any UPS shipments until Monday, May 21. And don't […]

July 27, 2004
GM4 - back in stock!

Missed the GM4s? Us too. It took much longer than we expected to get them through clearances this time, but they've finally made it to our doorsteps!

June 29, 2007
Cold, hard, steel... mounts!

Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!

December 15, 2015
Christmas Eve Shipping Deadlines

Within Canada Purolator Air - Dec 23 Purolator Ground - Dec 16 Canada Post Expedited - Dec 11 Canada Post Xpresspost - Dec 22 To The United States UPS Express (to United States) - Dec 22 UPS Ground (to United States) - Dec 12 USPS Expedited (to United States) - Dec 9 Xpresspost (to United […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.