The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions.
1. Your Parts!
Step 1: Parts
8 x 4-40 nuts
8 x 4-40 x 3/8" bolts
2 x Clear acrylic light-pipes
4 x Black acrylic spacers
6 x Black acrylic SAFE sides (shown here with brown protective paper already removed)
0 x Raspberry Pi (sorry - not included in the kit!)
2. The Baseplate
Step 2: Baseplate preparation
Find 4 of the 4-40 x 3/8" bolts, and put them through the baseplate, and press the spacers on from the other side. Thee bolts will sort of stay put until you can get the Raspberry Pi on the baseplate. (If adding to a VESA mount, do only 2 diagonal screws)
3. Adding the Raspberry Pi
Step 3: Mounting the Pi to the baseplate
Slide the Raspberry Pi onto the bolts. The Pi is designed for metric M3 hardware, but we're still using imperial #4 hardware, which is a smidge bigger. The bolts may need to be screwed through the holes in the Pi.
Add the #4 nuts, and tighten them down.
4. Adding 3 of the 4 Sides
Step 4: 3 of the 4 sides to be added to the baseplate
Arrange the sides as shows. The sideplate on the top in this image has the long cutout to accommodate a ribbon cable from the 40-pin expansion port. The front faceplate on the right (with the label engravings face-down) is for the communications side. The sideplate on the bottom has the ports for the power, video, and audio I/O.
Align them all up on the baseplate, and use a pair of 4-40 nuts and bolts to lock them in place.
5. Adding the SD-Card / LightPipe Faceplate
Step 5a: Preparing for lightpipes
Lay the final side faceplate face-down beside the assembly, and pop the clear lightpipe parts out of their holder. It is not necessary to strip the paper off this part.
Sandwich the two lightpipes together, and push them into the lightpipe indicator hole. They will sit a bit loose until the faceplate is attached to the baseplate.
Step 5b: Lightpipe assembly
Carefully assemble this assembly to the baseplate, and finish attaching it with the remaining 4-40 nuts and bolts.
Step 6: Top Plate mounting
Notch the top plate into the slots in the rear faceplate, and gently flex the frontplate out to let the tab snap into place. You're ready to power up, with full access to the indication LEDs on the Pi mainboard via the lightpipes!
We're starting to get feedback on Sumovore modifications by our customers. Like, turning the Sumovore into a Room-rover. Or 18V motor operation modifications. Or 'Kaoken' double-voltage adrenaline charges when pushing an opponent. All sorts of stuff! We'll start featuring these modifications shortly, but until then, you may want to take a look at our own […]
We love SparkFun. Great group of people. Excellent products. It's just that they're... well... twisted and cruel. You see their RoboJoust event? We didn't take them serious when they said it was to be performed 4' off a concrete floor. But here's the proof. They're actually building the table that high off the ground. Next […]
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]
Some quick heads-up: Apparently the road to recovery in New York is still fairly rough, and as a result our datacenter company is facing some intermittent outages. We appreciate your patience while our site fights off the hiccups. Random piece of information: did you know the collective nouns for a group of weasels include boogle, […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.