Solarbotics Blog Posts & News
3D Printed frame for Line Follower
Dave Hrynkiw
November 17, 2009
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
SparkFun hates robots.
Dave Hrynkiw
November 17, 2009
We love SparkFun. Great group of people. Excellent products. It's just that they're... well... twisted and cruel. You see their RoboJoust event? We didn't take them serious when they said it was to be performed 4' off a concrete floor. But here's the proof. They're actually building the table that high off the ground. Next […]
What's on the burner...
Dave Hrynkiw
November 17, 2009
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]
New Instructables!
Dave Hrynkiw
November 16, 2009
Our clear breadboard was recently blogged on Makezine, which reminded me we juuuust about had an instructable ready for that same item. So, a few hours later, it is finished and posted. And while I was at it, I finished editing another Instructable by Jerome Demers, our intern. He did up a DIY Miniball instructable […]
Closed for Rememberance Day (Nov 11th)
Dave Hrynkiw
November 7, 2009
Hey everyone! The first week of November has already slid by, and that puts us coming up to Remembrance Day, or Veteran's Day for our pals in the US. We'll be closed on Wednesday, November 11th to observe the event. We will resume the processing/shipping of orders and responding to any correspondence we've received when […]
Oomlout - Solarbotics Edition!
Dave Hrynkiw
November 2, 2009
Good news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit. Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing […]
Happy Halloween!
Dave Hrynkiw
October 30, 2009
You know how I said we'd have new and exciting stuff to show off this week? That isn't quite the case. It's just been one of those weeks, and we don't have anything ready to go for you. But I can say this - we'll be opening up pre-orders for our brand spankin' new Oomlout […]
Protoshield, FTDI Breakouts, GM10s IN ST...
Dave Hrynkiw
October 23, 2009
Alriiiiight. It's Friday, and you know what that means... We get to sleep in tomorrow morning! WOOOOO! Also, it means that it's time for the weekly news post of new product goodness. Today we've got four items to show off: Freeduino SB-Protoshield FTDI Basic Breakout (3.3V) FTDI Basic Breakout (5V) Designed particularly for the Freeduino […]
Calgary ProtoSpace Open House
Dave Hrynkiw
October 14, 2009
Calgary's fledgling hacking group is hosting an open-house at the ProtoSpace on October 27 November 3rd. We're planning to be there - come on down!
MakerBEAM
Dave Hrynkiw
October 14, 2009
Ok, besides being a conjunction of two things we really love (Make Magazine & BEAM Robotics), it also is an open-source hardware project that is about little "T-Beams". This project is using the "KickStarter" model of sponsorship. Ask for pledges for the projects, and if the minimum is met (and it has - yay!), the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.