The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
More about website development
Dave Hrynkiw
October 15, 2019
A decent website is a core of a web-centric store like ours. Back in the early days, I hand-coded HTML (yeah, go back to waybackmachine to admire that work), and what you got is what you got. Since then, we rebuilt Solarbotics.com through 3 more iterations of totally refactored hand-coded platforms, and then 2 aborted attempts as re-releases on Magento and then WordPress/Woocommerce. Those last two attempts cost us the ball-park of a really really nice Tesla with nothing much to show for it, with a devastating website hack in-between to kick us in the nether-regions. Many expensive and painful lessons were learned in this process.
Since then, we've released unsatisfactory consultants, brought the development management in-house, and piece-mealed specific development aspects to consultants with MUCH better results. It's come at the cost of letting our internal R&D coast for the better part of a year while we focus our top-talent on getting the website reworked, but its something that needed to be done.
We are about to re-release Solarbotics.com on a WordPress/Woocommerce platform, with some new features added, and some others removed. We'll be staging out further enhancements as we get comfortable with the platform, and hope you'll continue being good customers of Solarbotics.com.
MORE POSTS
BEP Application: Servocore Walker
OpenBeam & Nightmares in China Sour...
We've been a big fan of Openbeam for a long time, and when Terence Tam started producing 3D printers using this material, we were hopeful that this would be a great fit for his operation. Nice material, great engineering - what could go wrong? LOTS. Follow his spiral down the Asian rabbit-hole when his selected […]
Friday New Product Post and a Few Projec...
It's snowing here. Here's the proof - a ruler measured with another ruler, reading about 7" depth of (what used to be) snow. It's a massive invasion of snowflakes, and they don't seem too friendly. The amount of snowfall we are experiencing now can prevent anyone in their right mind from being outside. And the […]
Cold, hard, steel... mounts!
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.