Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Aleph Objects (Lulzbot) is still alive! ...
Dave Hrynkiw
November 8, 2019
Update: Additional information from the Loveland Reporter Herald
We've been big fans of Aleph Objects' 3D printers. They fit that sorta "Prosumer" niche. A bit better than kit-builds, not quite as expensive as the big professional units.
We were disappointed we got the call a few months ago relating that Aleph was looking to shut down or change hands, as we supply the local Calgary school board with 3D printers, and the Aleph series was a solid part of that commitment.
Now we've just received the following newsletter. I can't find a post on the Aleph Objects site (yet), so here it is, verbatim:
We are pleased to announce that the assets of Aleph Objects located in Loveland, CO including the well-known LulzBot 3D printing brand, have been acquired by Fargo Additive Manufacturing Equipment 3D (FAME 3D), a Fargo, ND company.
Grant Flaharty, CEO of Aleph Objects, and now FAME 3D says this, “LulzBot is one of the core leaders in the Desktop 3D Printing Industry. It’s an organization filled with intelligent, innovative people and solutions that are changing the opportunities for Manufacturing and Medicinal Markets. We couldn’t stand by and watch that type of innovation to go unrealized.”
FAME 3D is continuing the open source legacy for its customer products. Now with solid financial backing, we can continue with cutting edge innovation, high quality long-lasting printers, and product advancements aimed at providing industry-leading solutions.
LulzBot will be placing a renewed effort on customer support and responsiveness to customer feedback to help improve its current and future product offerings.
The LulzBot TAZ Worhorse, TAZ Pro, and Mini 2 3D printers are the recipients of numerous industry awards and are available for order now.
Haven't found much out about FAME3D yet, but we're glad to see they are carrying on the Lulzbot line!
MORE POSTS
Closed Monday, February 21st
We all have family, in one form or another. Parents, siblings, aunts, uncles, cousins, grandparents, friends, pets... In some cases, even a delapitated, 20 year-old Honda Civic lovingly referred to as Lou. It has rust in the rear quarter panels and the steering wheel squeeks when it gets cold, but things just wouldn't be the […]
New Product Friday: Arduino Yun and Thre...
Today is Friday. Lets celebrate by using only green towels and omitting the letter R. Or just seeing what new stuff we got: Arduino Yun $71.95 Take a wireless router-on-a-chip, and stick an Arduino Leonardo to it - that's the new Arduino YUN! Evil Mad Science The Three Fives Kit $35.00 Take a venerable 555 […]
SSK Head to SW2 instructions / schematic...
Still slogging through the backlog of "things to add to the website". One of them is the ScoutWalker/SunSeeker interface instructions, in PDF format (as per usual). So if you want to see exactly how we get the head "talking" to the body, and what the exact circuitry is, come take a look! We also are […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.