With the holidays fast approaching we would like to announce our holiday schedule which is outlined below. When deciding how to ship your orders, please review the shipping estimates at checkout as some methods may not arrive before the beginning of the holidays!
Bicore Experimenter's PCB/Bundles
Dave Hrynkiw
December 3, 2001
Sorry for the delay in announcements, folks! Been quite busy getting these latest devices ready for sale.
The latest addition to the Solarbotics family of products is the Bicore Experimenter's PCB (aka:) BEP. This is a collection of useful, proven circuits that have been used by Solarbotics, and many other users of Mark Tilden's Bicore technology. We've gone through great pains to make sure these boards are proven error-free (3 revisions were tested, so please don't find any problems now!), so you should be able to take a module, put in the components, power it up, and it should work as required by your design.
Demand for these modules has been quite high, so we've released them with a practically complete set of documentation (the MSE1 module still needs some value tables generated), and application notes are still being generated. The information included is sure to get you well on your way to building your own BEAM devices.
In addition to making these very useful raw PCB modules available, we're also introducing them with an optional Bicore Experimenter's PCB Bundle which contains practically all you need to make these modules functional. It's a BIG savings over ordering the resistors, capacitors, chips, etc individually. And if that's not complete enough for you, we've also listed (not included) more parts to round out your collection for actually building robots with the bundle.
MORE POSTS
Solarbotics Closed Monday(Thanksgiving)
Yes, we're Canadian, so we celebrate the Thanksgiving weekend a bit earlier than our neighbours to the South. Thus, we won't be in on Monday the 8th. But our website will always be here! Have a good Columbus Day down there!
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Solarbotics Holiday Hours
Solarbotics will be closing for the winter holidays as of Tuesday, December 24th. We will be open again December 30, 2002.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.