We are closed tomorrow April 3 for Good Friday, so we are bringing you the new product reveal early: Today we are happy to announce the addition to the EggBot family - the fully assembled Egg-Bot PRO!
Bicore Experimenter's PCB/Bundles
Dave Hrynkiw
December 3, 2001
Sorry for the delay in announcements, folks! Been quite busy getting these latest devices ready for sale.
The latest addition to the Solarbotics family of products is the Bicore Experimenter's PCB (aka:) BEP. This is a collection of useful, proven circuits that have been used by Solarbotics, and many other users of Mark Tilden's Bicore technology. We've gone through great pains to make sure these boards are proven error-free (3 revisions were tested, so please don't find any problems now!), so you should be able to take a module, put in the components, power it up, and it should work as required by your design.
Demand for these modules has been quite high, so we've released them with a practically complete set of documentation (the MSE1 module still needs some value tables generated), and application notes are still being generated. The information included is sure to get you well on your way to building your own BEAM devices.
In addition to making these very useful raw PCB modules available, we're also introducing them with an optional Bicore Experimenter's PCB Bundle which contains practically all you need to make these modules functional. It's a BIG savings over ordering the resistors, capacitors, chips, etc individually. And if that's not complete enough for you, we've also listed (not included) more parts to round out your collection for actually building robots with the bundle.
MORE POSTS
Friday New Product: Grove Stuff
New today is the Grove series from SeeedStudio. What makes Grove different is that is very modular, making quick-prototyping quite rapid. Usually this is an expensive feature. The rule of thumb is "Price, Speed, Quality - pick any two", but Seeed has made the 3 curves match just right.
Escaps back in stock!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Book special continues...
Well, the first 100 copies of "Junkbots" have officially been sold. But since I can't get enough of signing the inside cover of every book in the office, we're going to have to extend the offer until the ink in my pen runs out. So the Junkbots book/motor deal will last for until at least […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.