It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]
Bicore Experimenter's PCB/Bundles
Dave Hrynkiw
December 3, 2001
Sorry for the delay in announcements, folks! Been quite busy getting these latest devices ready for sale.
The latest addition to the Solarbotics family of products is the Bicore Experimenter's PCB (aka:) BEP. This is a collection of useful, proven circuits that have been used by Solarbotics, and many other users of Mark Tilden's Bicore technology. We've gone through great pains to make sure these boards are proven error-free (3 revisions were tested, so please don't find any problems now!), so you should be able to take a module, put in the components, power it up, and it should work as required by your design.
Demand for these modules has been quite high, so we've released them with a practically complete set of documentation (the MSE1 module still needs some value tables generated), and application notes are still being generated. The information included is sure to get you well on your way to building your own BEAM devices.
In addition to making these very useful raw PCB modules available, we're also introducing them with an optional Bicore Experimenter's PCB Bundle which contains practically all you need to make these modules functional. It's a BIG savings over ordering the resistors, capacitors, chips, etc individually. And if that's not complete enough for you, we've also listed (not included) more parts to round out your collection for actually building robots with the bundle.
MORE POSTS
Canada Day & 4th of July
We'll be closed Thursday June 1st, as it is Canada Day! Ah, time to take off the snow-shoes and swim with the polar bears, and eat snow-cones with our Husky dogs to celebrate Canada's birthday! It's worth noting that we will be open on July 5 (most of you Americans get Monday off, right?).
Things for Movin' an' a-Groovin'
Alriiiight - it's time to shake and twist and turn! We got three new toys to show off, and they're all about movement: Pololu Wheel Encoder (for 42x19mm wheel) Rubber Tire Replacements for RW2 Sanyo SMD Vibra Motor Now, these are fantastic and all, but we know that everyone has the same burning question that […]
New TINY Pogo Pin Probes
We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.