We're happy to announce that the 2001 Los Alamos BEAM Robotics Workshop is going ahead this May 3 to 6th! After much delay and threats of budget-cuts, funding has finally been secured. Thanks to Joe Vigal and Paul Argo of the Los Alamos National Laboratories for keeping this great event alive for this final year! […]
Bicore Experimenter's PCB/Bundles
Dave Hrynkiw
December 3, 2001
Sorry for the delay in announcements, folks! Been quite busy getting these latest devices ready for sale.
The latest addition to the Solarbotics family of products is the Bicore Experimenter's PCB (aka:) BEP. This is a collection of useful, proven circuits that have been used by Solarbotics, and many other users of Mark Tilden's Bicore technology. We've gone through great pains to make sure these boards are proven error-free (3 revisions were tested, so please don't find any problems now!), so you should be able to take a module, put in the components, power it up, and it should work as required by your design.
Demand for these modules has been quite high, so we've released them with a practically complete set of documentation (the MSE1 module still needs some value tables generated), and application notes are still being generated. The information included is sure to get you well on your way to building your own BEAM devices.
In addition to making these very useful raw PCB modules available, we're also introducing them with an optional Bicore Experimenter's PCB Bundle which contains practically all you need to make these modules functional. It's a BIG savings over ordering the resistors, capacitors, chips, etc individually. And if that's not complete enough for you, we've also listed (not included) more parts to round out your collection for actually building robots with the bundle.
MORE POSTS
The Solarbotics GraviTrack Marble Machin...
Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family. Elegant, swooping hands pass marbles to each other to the top of a sweeping multi-level track, available in either solar or battery configuration! Approximately twice as wide as our spiral Solar or Battery Marble machine kits, the GraviTrack is still desk-top […]
The Many Faces of SAFE
The SAFE (Solarbotics Arduino Freeduino Enclosure) is a marvelous contraption of laser-cut acrylic that makes a complete enclosure for your Arduino project. It gives you a protective shell with enough room for a basic shield, with knock-outs for power and USB connection. It even has a power switch. The big problem with Arduinos and Freeduinos, […]
Closed March 29
Ok, so tomorrow is apparently not a regular Friday, but a good one. I would say, that is a very honest thing to call it, because what else would you call a Friday that is a day off? Sure, it's good. So that's what we are doing on that day - being closed and away, […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.