Updated for May 15, 2020The pickings are getting slim, but we've got more coming shortly. Should be here by the end of the month!
Bicore Experimenter's PCB/Bundles
Dave Hrynkiw
December 3, 2001
Sorry for the delay in announcements, folks! Been quite busy getting these latest devices ready for sale.
The latest addition to the Solarbotics family of products is the Bicore Experimenter's PCB (aka:) BEP. This is a collection of useful, proven circuits that have been used by Solarbotics, and many other users of Mark Tilden's Bicore technology. We've gone through great pains to make sure these boards are proven error-free (3 revisions were tested, so please don't find any problems now!), so you should be able to take a module, put in the components, power it up, and it should work as required by your design.
Demand for these modules has been quite high, so we've released them with a practically complete set of documentation (the MSE1 module still needs some value tables generated), and application notes are still being generated. The information included is sure to get you well on your way to building your own BEAM devices.
In addition to making these very useful raw PCB modules available, we're also introducing them with an optional Bicore Experimenter's PCB Bundle which contains practically all you need to make these modules functional. It's a BIG savings over ordering the resistors, capacitors, chips, etc individually. And if that's not complete enough for you, we've also listed (not included) more parts to round out your collection for actually building robots with the bundle.
MORE POSTS
Project Monday: Gilroy's ErgoGP
Since we've been slacking for awhile on our Project Monday, I thought I'd share a project I've been working on the past couple of weeks. Being the office code monkey, I spend a lot of time in front of a keyboard. This has led to a fair amount of discomfort and sparked a quest for […]
Wheee! They're here - the new RW2!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
PIMP YO' SUMO!
The biggest complaint we've ever had is that the Sumovore is boring. I mean, yeah, it can beat the tar out of most other sumos in the ring without batting an eye. But it's just so boring to watch. It'd be funner to watch the paint dry on a pot of boiling water. So, after […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.