Well. Hello there. It's been a while, hasn't it? Have have you been doing? How did that thing end up going for you? And those mutual acquaintances of ours? All doing well, we hope. Except for that one mutual acquaintance. You know, the one with the eye patch and kangaroo. I don't know about you, […]
Bicore Experimenter's PCB/Bundles
Dave Hrynkiw
December 3, 2001
Sorry for the delay in announcements, folks! Been quite busy getting these latest devices ready for sale.
The latest addition to the Solarbotics family of products is the Bicore Experimenter's PCB (aka:) BEP. This is a collection of useful, proven circuits that have been used by Solarbotics, and many other users of Mark Tilden's Bicore technology. We've gone through great pains to make sure these boards are proven error-free (3 revisions were tested, so please don't find any problems now!), so you should be able to take a module, put in the components, power it up, and it should work as required by your design.
Demand for these modules has been quite high, so we've released them with a practically complete set of documentation (the MSE1 module still needs some value tables generated), and application notes are still being generated. The information included is sure to get you well on your way to building your own BEAM devices.
In addition to making these very useful raw PCB modules available, we're also introducing them with an optional Bicore Experimenter's PCB Bundle which contains practically all you need to make these modules functional. It's a BIG savings over ordering the resistors, capacitors, chips, etc individually. And if that's not complete enough for you, we've also listed (not included) more parts to round out your collection for actually building robots with the bundle.
MORE POSTS
GM4 - back in stock!
Missed the GM4s? Us too. It took much longer than we expected to get them through clearances this time, but they've finally made it to our doorsteps!
MakeFashion Tech Gala Photos
Solarbotics just attended the MakeFashion Gala here in Calgary. It was a glowing show of glowing lights and wearable technology. Check out the photos in our Flickr stream. Photo courtesy George Dimitrov Photography Among all the other wonderful things we've seen using our string LEDs before, there was nothing quite as intense as these outfits. […]
Friday New Product: Grove
Grove - 4-Digit Display $7.25 4 digit displays are usually a 12 pin module. In this Grove gadget, we used a TM1637 to scale down the controlling pins into 2 Grove pins. Wireless USB Adapter $16.50 USB WiFi (802.11b/g/n) Module: For Raspberry Pi and more. Grove - Screw Terminal $3.50 Grove - Screw Terminal with […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.